INSTALLATION OPERATION AND MAINTENANCE INSTRUCTION KV DUO KVK DUO KVK001
Table Of Contents
- 1Introduction
- 2Safety
- 3Transportation and storage
- 4Installation
- 4.1 To do before the installation of the product
- 4.2 To install the product
- 4.2.1 To open the product
- 4.2.2 To attach the connection box
- 4.2.3 To install the KVK Silent fan and the KVK Slim fan
- 4.2.4 To install the KVK DUO fan and the KVK fan
- 4.2.5 To install the KV DUO 150 EC fan
- 4.2.6 To install the KV DUO 250 – 315 EC fan
- 4.2.7 To install the KV DUO 400 – 630 EC fan
- 4.2.8 To connect the ducts to the product
- 5Electrical connection
- 6Commissioning
- 7Operation
- 8Maintenance
- 9Troubleshooting
- 10Disposal
- 11Warranty
- 12Technical data
- 13Accessory overview
- 14EU Declaration of Conformity
- 15UK Declaration of Conformity
2 Safety
2.1 Safety definitions
Warnings, cautions and notes are used to point out specially
important parts of the manual.
Warning
If you do not obey these instructions,
there is a risk of death or injury.
Caution
If you do not obey these instructions,
there is a risk of damage to the product,
other materials or the adjacent area.
Note:
Information that is necessary in a given situation.
2.2 Safety instructions
Warning
Read the warning instructions that follow
before you do work on the product.
• Read this manual and make sure that you understand the
instructions before you do work on the product.
• Obey local conditions and laws.
• The ventilation contractor and the operator are responsi-
ble for correct installation and intended use.
• Keep this manual at the location of the product.
• Do not install or operate the product if it is defective.
• Do not remove or disconnect safety devices.
• Make sure that you can read all warning signs and labels
on the product when it is installed. Replace labels that
have damage.
• Only permit approved personnel to work on the product
and to be in the adjacent area during all work on the
product.
• Make sure that you know how to stop the product quickly
in an emergency.
• Use applicable safety devices and personal protective
equipment during all work on the product.
• Before you do work on the product, stop the product and
wait until the fan impeller stops. Make sure that there is no
voltage on the motor terminals.
• If the maintenance is not correctly and regularly done,
there is risk of injury and damage to the product.
• Only do the maintenance as given in this manual. Speak
to Systemair technical support if other servicing is
necessary.
• Always use spare parts from Systemair.
• Sound levels exceeding 70 dB(A) may occur depending
on model and size. Visit www.systemair.com for more de-
tailed information about your product.
• The product is not to be used by persons, including chil-
dren, with reduced physical, sensory or mental capabil-
ities, or lack of experience and knowledge, unless they
have been given supervision or instruction.
• Do not allow children to play with the device.
2.3 Personal protective
equipment
Use personal protective equipment during all work on the
product.
• Approved eye protection
• Approved protective helmet
• Approved hearing protection
• Approved protective gloves
• Approved protective shoes
• Approved work clothing
4