INSTALLATION OPERATION AND MAINTENANCE INSTRUCTION KV DUO KVK DUO KVK001
Table Of Contents
- 1Introduction
- 2Safety
- 3Transportation and storage
- 4Installation
- 4.1 To do before the installation of the product
- 4.2 To install the product
- 4.2.1 To open the product
- 4.2.2 To attach the connection box
- 4.2.3 To install the KVK Silent fan and the KVK Slim fan
- 4.2.4 To install the KVK DUO fan and the KVK fan
- 4.2.5 To install the KV DUO 150 EC fan
- 4.2.6 To install the KV DUO 250 – 315 EC fan
- 4.2.7 To install the KV DUO 400 – 630 EC fan
- 4.2.8 To connect the ducts to the product
- 5Electrical connection
- 6Commissioning
- 7Operation
- 8Maintenance
- 9Troubleshooting
- 10Disposal
- 11Warranty
- 12Technical data
- 13Accessory overview
- 14EU Declaration of Conformity
- 15UK Declaration of Conformity
Note:
The arrow on the name plate shows the direction of the
airflow.
4.2.1 To open the product
1 Loosen the screws on the lid that is connected to the fan.
The figure shows how to open the KVK Silent fans and KVK
Slim fans.
The figure shows how to open the KV DUO fans, the KVK
DUO fans and the KVK fans.
2 Open or remove the lid.
4.2.2 To attach the connection box
Note:
This procedure applies to products where the connection
box is supplied loose inside the product.
1 Attach the connection box to the outlet side of the fan
casing with the 4 supplied screws.
For the KV DUO and KVK DUO, the connection boxes are
fixed to the fans inside the casing.
6