126186 INSTALLATION MANUAL 392 10
Table Of Contents
- Spiskåpa 392–10/B
- SV Bruksanvisning
- Emhætte 392–10/B
- DA Betjeningsvejledning
- Cooker hood 392–10/B
- GB User instructions
- Safety Instructions
- Installation
- Adjusting air flow
- Instructions for use
- Service and warranty
- Kjøkkenhette 392–10/B
- NO Bruksanvisning
- Fig. 17
- Fig. 18
ADJUSTING AIR FLOW
SETTING THE DAMPER
Basic flow
Fig. 11
Basic ventilation is set by moving the slid-
ing damper A to the desired position ac-
cording to marking B, Fig. 11. (See
diagram, page 32.)
Forced flow
Fig. 12
Open the damper and pull out the reducing
washer C, Fig. 12.
Fig. 13
Adjust forced ventilation by cutting out a
suitable number of rings from the reducing
washer, Fig. 13. (See diagram, page 31.)
Make sure that the guide groove D is cor-
rectly positioned when refitting the washer.
Measuring pressure drop
Fig. 14
The pressure drop is measured by fitting
the hose on the measuring port E at the
front edge of the coupling, Fig. 14.
991.0434.495/126186/2017-02-08 21