DataSheet OPTIMA R RI202012 en GB

Variable Air Volume Control | 1 / 21
OPTIMA-R
Single or double skin circular VAV units
Ordering code
Example of the ordering code:
OPTIMA-R - 100 - BLC1 - 50 - 110 - 0
OPTIMA-R size 100, not isolated, with LMV-D3 MP-BUS communicative controller / drive,
V
min
= 50 m
3
/h, V
max
= 110 m
3
/h, control voltage DC 0 V ... 10 V.
NOTES:
* The controller types BLC1MOD, BLC1LON,
BLC1KNX have no possibility of setpoint
adjustment with control signal DC 0 V
(2 V) ... 10 V. The Setpoint is adjusted via
BUS communication.
If the air volumes are not given during the or-
dering process, then standard Factory setting
will be applied according to table
V
min
can also be set to 0 m
3
/h if required by
demand upon ordering
The setup values of V
min
and V
max
can be cho-
sen according to the data in the dimensions /
volumes table, page 4. The value of V
min
can
be adjusted from 0 % to 100 % of V
nom
.
The value of Vmax can be adjusted from
20 % to 100 % of V
nom
.
The standard input signal on the controller is
set to 2 V ... 10 V, upon request 0 V ... 10 V
can also be selected.
OPTIMA-R
Double skin isolated version I
Drive/ controller type
BLC1
BLC4
BLC1MOD
BLC1LON
BLC1KNX
GO
GOMOD
BELIMO L(N) MV-D3, MP-BUS
BELIMO L(N) MV-D3
BELIMO L(N) MV-D3, MODBUS
BELIMO L(N) MV-D3, LON
BELIMO L(N) MV-D3, KNX
OPTIMA-GO
OPTIMA-GO, MODBUS
V
min
(m
3
/h)
V
max
(m
3
/h)
Control voltage *
DC 0 V ... 10 V
DC 2 V ... 10 V
0
2
Size (mm) 80 - 630

Summary of content (21 pages)