OPERATION INSTRUCTIONS DSG PRESSURE SENSOR

Intended use
These devices are intended exclusively for measured value acquisition of differential
pressures (non-aggressive gases). Their operation is only permitted under observance
of the specifications in these operating instructions.
Any other use above and beyond this will be considered as improper use. The manufac-
turer will not be liable for any damage resulting from this. The company using it bears the
sole risk.
3 Product overview
3.1 Function
Differential-pressure sensors in proven ceramic-cantilever technology for climate and
clean-room application.
The measured differential pressure (air and non-aggressive gases) is transformed into
an output signal proportional to the measuring range (0...10 V).
The range from 50 Pa to 6000 Pa is covered with 3 types of device. With each type four
measuring ranges over DIP switch are selectable.
The differential pressure sensor supplies a proportinal output signal when the pressure
at the “Plus”- connection exceeds the pressure at the “Minus”-connection.
3.2 Storage
•
The device must be stored in its original packaging in a dry and weather-proof room.
•
Avoid exposure to extreme heat and cold.
•
Avoid over-long storage periods (we recommend a maximum of one year).
3.3 Disposal / recycling
Disposal must be carried out professionally and in an environmentally friendly way in
accordance with the respective national legal stipulations.
" Separate the materials by type and in an environmentally friendly way.
" If necessary, commission a specialist company with the waste disposal.
Operating Instructions MPG-..V Product overview
L-BAL-E248-GB 1515 Index 001 Part.-No. 00163446
4/11