UserManual FGS201811 en GB

201811 | User Manual FGS | 1/222/22 | User Manual FGS | 201811User Manual FGS | 201811
Introduction
This is the original installation, inspection and operating instructions document
for FGS air transfer grille.
EVERY AIT TRANSFER GRILLE NEEDS TO BE INSTALLED IN ACCORDANCE
WITH THIS DOCUMENT!
FGS
Air Transfer Grille
Installed in the wall without duct connections
Cover mesh on both sides
Cold smoke tightness S
a
= 238 m
3
/(h · m
2
) at 25 Pa according to EN 1364-5
Dimension range (mm) L × H = 200 × 200 up to 800 × 1000
Slovak Technical
approval
Nr:
SK01-ZSV-0364
Fire resistivity*
NOTE: * Fire resistivity depends on the type of installation (see Tab. 1)
Good to know
Current information on all re safety products are
available at www.systemair.com/FSPoverview
Wet Installation
Maximum performance up to EI90S
Using plaster/mortar/concrete lling
Installation into a Soft Crossing
Maximum performance up to EI90S
Using mineral wool segments and a reproof coating layer