Installation , Operation and Maintenance Instructions Genius

6.2 Location Dimensions
Figure 3: Minimum distances
NOTE
The indicated distances are minimum distances.
" Ensure the minimum distances for maintenance and service.
6.3 Preparation
The Combi Unit Genius is very compact. The unit is placed on teon sliders ensuring sound insulation and easy positioning. Adjustable
feet are not used to avoid rocking due to balance point shifting.
6.3.1 Installation Place
NOTE
Ensure a professional noise reduction of the unit.
" Use suitable sound insulation mats.
" Install the unit in a frost-free room on a load-bearing oor. The oor must be horizontal, level, solid and durable.
" Place the unit only on a oating screed when this is done properly.
" Also take the weight of the device including the content of the water tank into account.
" Align the unit exactly to ensure a safe condensate drain.
" Level the combi unit, if necessary place e.g. sound insulation strips under the unit.
RECOMMENDATION
" Install the complete heating/cooling unit not directly below, above or next to living rooms or bedrooms.
If the room conditions require disassembly of the combi unit see „6.4.1 Disassembly“ page 19.
18
Assembly
Genius - V 1.0