Installation , Operation and Maintenance Instructions Genius

9.3 Control
9.3.1 External Heat Pump Control
In addition to these instructions, you can also download a technical manual from the Internet (www.systemair.com). This gives a descrip-
tion of the separate heat pump circuit board and its parameters. These parameters are factory set and can only be adjusted with an
additional control unit.
" Inform the Systemair service or a Systemair service partner in case of an emergency service.
9.3.2 Central Building Services Unit Control
9.3.2.1 General
The building service centre "Genius" can preferably be adjusted by a notebook/PC or by the Systemair App (Android phone). This pro-
vides a perfect overview of all user functions and parameters (self-explanatory). The control of the system by a control unit with a four
line display is also possible.
9.3.2.2 Smart Home/Bus Connection/Building Control System
The control of the central building services unit can be incorporated in a building control system / smart home system. Communication
takes place via the Modbus protocol.
If a different eldbus is being used for building automation, a gateway is needed which is "modbus-slave over TCP/IP"-compatible. Syste-
mair will provide the Modbus list required for this.
46
Service
Genius - V 1.0