Installation , Operation and Maintenance Instructions Genius

10 Operation/Control via Internet/App
WARNING
Damage due to operator error
Operator errors could result in personal injury and/or property damage.
» Ensure that children never operate the unit unsupervised or play with it.
» Ensure that only persons have access which are capable of the appropriate use of the unit!
NOTE
Parameters which can be set are highlighted with blue letters. The formatting of the settings is done by the program.
Examples:
Enter 2.8. as starting point for holiday 2 - the program converts to 2 Aug.
Or enter 47 as setpoint - the program converts to 47 °C.
10.1 General Information
During commissioning, the controller is established. The access is normally established via an IP address.
If you use the cloud feature (see „1.3 Using the Systemair-Cloud“ page 6), only the visual representation changes, the operation
remains the same.
10.1.1 Access
Figure 18: Access
Figure 19: Log on screen
47
Genius - V 1.0
Operation/Control via Internet/App