Installation , Operation and Maintenance Instructions Genius
1.3 Using the Systemair-Cloud
Conrming the Systemair-Cloud enables Systemair having access to your controller and its settings. It goes without saying that we do this
only after request/permission of the unit user.
Systemair-Cloud provides qualied support (malfunctions, incorrect settings, software errors etc.) in an easy and quick way which also
saves costs and waiting time.
NOTE
Modications of the software settings can inuence the energy consumption and effectivity of the unit.
1.4 Heat Pump Special Rate/Utility Lock
Before unit installation, consult the utility company for your suitable rate.
1.5 Notes on Planning and Installation
Systemair is happy to do all the planning and project engineering for you, e.g.
• Determination of the air quantities using the building plans
• Conguration of the system using modern CAD software
• Quote generation with a list of specications and the associated prices
• Creation of assembly plans
• Delivery of the system components to the building site
• Support during assembly, commissioning and maintenance
1.5.1 Professional Planning
Observe the following during planning and electrical installation:
• Increased air volume ow during heating or cooling operation. This results in a larger supply air duct system. High air velocities and
noise development can be avoided.
• Air tightness and insulation of the supply air ducts require increased specications.
• PTC elements are required in most cases.
• Room controllers are obligatory.
• An additional duct system for secondary air is necessary.
1.5.2 Professional installation
" Choose the insulation of the supply air ducts within the shell (warm area) so that the air volume provides the heating performance in
each supply air room.
" Isolate supply air ducts in cold areas with an insulation of min. 50 mm.
" Ensure air tightness of the system to minimize heat loss.
" Use silencers for all unit connections.
" Make sure the installation is diffusion resistant, to prevent condensation forming during cooling.
NOTE
To ensure a proper system operation, the installation must be carried out according to the state of the art.
1.5.3 Service provided by Systemair
If the system is installed according to plan, Systemair will provide a warranty for the function.
For this, the following points are critical:
• The system was planned by Systemair.
• The system was installed and commissioned as planned.
• Only Systemair products were installed.
6
General Information
Genius - V 1.0