Installation , Operation and Maintenance Instructions Genius
11 Control via Display
Control the unit via the website, as this is the comfortable way. You can also set all parameters via the display. The tree logic or hierarchy
can be found in „11.5 Display Tree Logic“ page 89.
11.1 Display
The display of the combi unit Genius provides 4x20 characters. It is background illuminated. The illumination is normally off. It is activated
as soon as a button is pressed. The illumination will be turned off again after a period of inactivity.
NOTE
Values and status are displayed by colours:
Blue font: The values can be adjusted in the user level.
Red font: Adjustable in the service level after entering the password.
The password to access the service level is: 1111
11.2 Access
LEDs and Buttons
OK
C
1
7
8
2
6
3
4
5
9
1 Alarm LED (red)
2 Input/Enable LED (yellow)
3 UP button
4 RIGHT button
5 DOWN button
6 C button (clear)
7 OK button (conrm)
8 LEFT button
9 ALARM button
LEDs
AlarmLED(red) The alarm LED is illuminated when the combi unit has triggered an alarm.
Input/EnableLED(yellow) In some menus there are parameters that can be set. This is indicated by the ashing
yellow LED.
Fast ashing (2x/sec.): The parameter can be changed.
Slower ashing (1x/sec.): This parameter can be changed in the service level.
Buttons
UP/DOWN button The UP/DOWN buttons have two functions:
• Move between the menus of the actual menu levels.
• Increase/decrease parameters.
RIGHT/LEFT button The UP/DOWN buttons have two functions:
• Move between the menu levels
• Move between the parameter decimal digits
OK button Conrm the entered parameters with OK.
C button The C button cancels a parameter change and resets to the stored value.
ALARM button The ALARM button switches to the alarm list.
Software Corrigo E The software menus of the combi unit Genius are arranged in a horizontal tree logic.
Menus The menus are used to adjust the parameters by the user or service technician.
87
Genius - V 1.0
Control via Display