Installation , Operation and Maintenance Instructions Genius

Service settings Rotor Cooling recovery
Start: 2.0°C
Stop rotor at: 3.0°C
Defrost. level: 3
Frost protection: On
Service
settings Hot Water mode:
Automatic
Start pump if: Temp.
< Setpoint – 1°C
Stop charge pump: Temp.
> Setpoint + 2°C
Extended running HW pump:
150 s 1)
1) Do not to change this
value!
Service settings PTC PTC function: On
PTC start delay: 45 min .
PTC defrost power
HP: 20%
Switch-off point: -20°C
Preheater
Setpoint: -10°C
P-gain: 2.0
97
Genius - V 1.0
Control via Display