DIS INSULATION HOSE
Application:
• Insulation in air supply systems
• Air conditioning systems
• Reducing of heat loss
• Preventing/discharging of condensation
Technical Data:
• Temperature range: -30 °C to 140 °C
• Operating pressure: up to +2.000 Pa
• Bending radius: 0.54 x Ø + 25 or 50 mm
• Diameter range: 100 – 250 mm
• Standard length: 3 m
Material structure:
• Barrier: polyester fi lm
• Glass wool blanket: 25 or 50 mm, 16 kg/m³
• Outer jacket: Alu / poly laminate
• R-value glass wool:
• 25 mm: 0.65 m² K/W (ASTM C177-76)
• 50 mm: 1.30 m² K/W (ASTM C177-76)
• 75 mm: 1,95 m² K/W (ASTM C177-76)
• Appearance: Aluminium
Classifi cations:
• EU (EN 13501-1): B-s1,d0
• FR (NF): M1
• Marine certifi ed MED
Barrier:
The DIS Insulation hose has standard a barrier. The
barrier simplifi es the mounting.
LIABILITY:
The information contained in this brochure was current on the
publication date. DEC INTERNATIONAL reserves the right to make
changes in details at any time without prior notice. In order to
avoid misunderstandings, any interested party is advised to contact
DEC INTERNATIONAL checking for any changes in materials and/or
information after this brochure was published.
PLEASE NOTICE:
The consultant is responsible for the actual installation and
mounting of the product. The mentioned values with
respect to temperatures are not appropriate to be used to
determine the physical properties. These properties are
also dependent on humidity and the temperature of the air
inside and outside of the H.V.A.C. system.
TRADEMARKS:
ISODEC, the DEC logo and
DEC International are trademarks,
or registered trademarks of
Dutch Environment Corporation BV
in the Netherlands and/or other
countries.
RESTRICTIONS:
The ISODEC ducts are not suitable for
discharging combustion products from
open fireplaces and oil-fired boilers.
Neither are the ducts suitable for
transporting air with a high
concentration of acid and base.
23/1/2020
DEC INTERNATIONAL - P.O. BOX 35 - NL-7500AA - ENSCHEDE - THE NETHERLANDS - WWW.DECINTERNATIONAL.COM
ISOSLEEVE 25
THERMAL INSULATED DUCTING
The ISOSLEEVE 25 consists of an aluminium laminate outer jacket and provided with a glass wool insulation layer.
The thermal insulation is suitable for preventing condensation and minimizing heat loss and loss of cold.
APPLICATION
Insulation in air supply systems
Air conditioning systems
Insulation of rainwater discharge
Reducing of heat loss
Preventing/discharging of condensation
SPECIFICATIONS
Article code:
DHB{Ø}
Barrier:
The ISOSLEEVE 25 has standard a barrier. The barrier simplifies the
mounting, so that the installer will not have unnecessary contact with the
glass wool. Fix the Barrier with tape to the spiral duct and pull-out the
barrier at the other side, while second installer guides and holds the outer
jacket and insulation wool. (Installation video available)
A. Barrier
B. Insulation wool
C. Outer Jacket
D. Spiral channel
Temperature range:
-30 ⁰C to 140 ⁰C
Operating pressure:
up to +2000 Pa
Operating air velocity:
irrelevant
Min. bending radius:
/
Standard diameter range:
82 – 635 mm
Standard length:
10 mtr
CONSTRUCTION
Barrier
polyester film
Glass wool blanket:
25mm, 16kg/m³
Outer jacket:
Alu/poly laminate
R-value glass wool:
0.65 m² K/W
(ASTM C177-76)
Appearance:
Aluminium
CLASSIFICATIONS
EU (EN 13501-1):
B-s1,d0
FR (NF):
M1
Marine certified MED
The ISOSLEEVE 25 is also available, on request, with a 50 mm glass wool layer, the article number is: DHB50{Ø}
R-value glass wool: 1.3 (50 mm) m² K/W (ASTM C177-76).
Barrier
Insulation wool
Outer jacket
DEC INTERNATIONAL
TECHNICAL SPECIFICATIONS
LIABILITY:
The information contained in this brochure was current on the
publication date. DEC INTERNATIONAL reserves the right to make
changes in details at any time without prior notice. In order to
avoid misunderstandings, any interested party is advised to contact
DEC INTERNATIONAL checking for any changes in materials and/or
information after this brochure was published.
PLEASE NOTICE:
The consultant is responsible for the actual installation and
mounting of the product. The mentioned values with
respect to temperatures are not appropriate to be used to
determine the physical properties. These properties are
also dependent on humidity and the temperature of the air
inside and outside of the H.V.A.C. system.
TRADEMARKS:
ISODEC, the DEC logo and
DEC International are trademarks,
or registered trademarks of
Dutch Environment Corporation BV
in the Netherlands and/or other
countries.
RESTRICTIONS:
The ISODEC ducts are not suitable for
discharging combustion products from
open fireplaces and oil-fired boilers.
Neither are the ducts suitable for
transporting air with a high
concentration of acid and base.
23/1/2020
DEC INTERNATIONAL - P.O. BOX 35 - NL-7500AA - ENSCHEDE - THE NETHERLANDS - WWW.DECINTERNATIONAL.COM
ISOSLEEVE 25
THERMAL INSULATED DUCTING
The ISOSLEEVE 25 consists of an aluminium laminate outer jacket and provided with a glass wool insulation layer.
The thermal insulation is suitable for preventing condensation and minimizing heat loss and loss of cold.
APPLICATION
Insulation in air supply systems
Air conditioning systems
Insulation of rainwater discharge
Reducing of heat loss
Preventing/discharging of condensation
SPECIFICATIONS
Article code:
DHB{Ø}
Barrier:
The ISOSLEEVE 25 has standard a barrier. The barrier simplifies the
mounting, so that the installer will not have unnecessary contact with the
glass wool. Fix the Barrier with tape to the spiral duct and pull-out the
barrier at the other side, while second installer guides and holds the outer
jacket and insulation wool. (Installation video available)
A. Barrier
B. Insulation wool
C. Outer Jacket
D. Spiral channel
Temperature range:
-30 ⁰C to 140 ⁰C
Operating pressure:
up to +2000 Pa
Operating air velocity:
irrelevant
Min. bending radius:
/
Standard diameter range:
82 – 635 mm
Standard length:
10 mtr
CONSTRUCTION
Barrier
polyester film
Glass wool blanket:
25mm, 16kg/m³
Outer jacket:
Alu/poly laminate
R-value glass wool:
0.65 m² K/W
(ASTM C177-76)
Appearance:
Aluminium
CLASSIFICATIONS
EU (EN 13501-1):
B-s1,d0
FR (NF):
M1
Marine certified MED
The ISOSLEEVE 25 is also available, on request, with a 50 mm glass wool layer, the article number is: DHB50{Ø}
R-value glass wool: 1.3 (50 mm) m² K/W (ASTM C177-76).
Barrier
Insulation wool
Outer jacket
DEC INTERNATIONAL
TECHNICAL SPECIFICATIONS
DIS Insulation hose
The insulation hose is used for insulating outdoor and
exhaust air pipes, as well as to avoid formation of
condensation in air ducts in unheated areas.
Systemair · Novembre 2020
Systemair GmbH · Seehöfer Straße 45 · 97944 Boxberg
Tel.: +49 (0) 7930 9272-0 · info@systemair.de · www.systemair.de
HAFTUNG:
D
ie Informationen in diesem technischen Datenblatt sind gültig ab
d
em Zeitpunkt der Veröffentlichung. DEC INTERNATIONAL behält
s
ich jederzeit das Recht vor, gegebenenfalls Anpassungen und
Ä
nderungen von Details durchzuführen. Um Mißverständnisse
a
uszuschließen, sollten Interessenten Kontakt mit dem
U
nternehmen aufnehmen um festzustellen, ob seit dem
E
rstellungsdatum dieser Datenblätter Material- und/oder
Informationsänderungen stattgefunden haben.
ACHTUNG:
Der Objektberater ist für die eigentliche System- und
Montage des Produkts verantwortlich. Angegebene
Werten bezüglich Temperatur können nicht benützt
werden um die physischen Eigenschaften
festzustellen. Diese Eigenschaften sind auch
abhängig von der Luftfeuchtigkeit sowie von der
Temperatur der Luft innerhalb und außerhalb der
Klimaanlage.
WARENZEICHEN:
Das DEC Logo und
DEC International sind
Warenzeichen oder eingetragene
Warenzeichen der
Dutch Environment Corporation BV
in den Niederlanden und / oder
anderen Ländern.
Einschränkungen im
Anwendungsbereic h
Die ISO Schläuche sind nicht geeignet fü
r
das Abführen von Verbrennungsprodukte
n
ölgeheizter Kessel und offenen Herden
.
Außerdem sind die Schläuche nich
t
geeignet für den Transport von Luft mi
t
hoher Konzentration von Säuren un
d
Basen
17/2/2016
DEC INTERNATIONAL – POSTFACH 35 - NL-7500AA - ENSCHEDE - DIE NIEDERLANDE - WWW.DECINTERNATIONAL.COM
A
. Barrier
ISOSLEEVE 25
THERMISCH ISOLIERTE PRODUCTE
Der
ISO SLEEVE 25
besteht aus einem Aluminiumlaminat Außenmantel mit einer 25 oder 50mm Isolierschicht aus Isolierwolle.
D
ie thermische Isolation wird angewendet, um Kondensatbildung zu verhindern und Wärme- und Kälteverlust zu vermindern .
A
NWENDUNG
Isolierung von Belüftungssystemen
Klimaanlagen
Zur Verringerung von Wärmeverlust
Zur Vermeidung/Beseitigung von Kondensierung
T
ECHNISCHE DATEN
Artikelnummer:
DHB{Ø}
Dämmschicht
Der ISOSLEEVE 25 (und 50) ist Standard mit einer Dämmschicht
ausgeführt. Durch diese folie wird die Montage vereinfacht.
A. Trennfolie
B. Isolierwolle
C. Außenhülle
D. starres Rohr
Temperaturbereich:
-30
⁰
C bis 140
⁰
C
Betriebsdruck:
bis +2000 Pa
Luftgeschwindigkeit:
irrelevant
Biegeradius:
0.54 x Ø + 25mm
Durchmesserbereich:
52 – 635 mm
Standardlänge:
10 mtr
M
ATERIALAUFBAU
Dämmschicht
polyester film
Isolierwolldecke :
25mm, 16kg/m³
Außenmantel:
Alu/poly laminat
R-Wert Isolierwolle :
0.65 m
²
K/W
(ASTM C177-76)
Standardfarbe :
Aluminium
BRANDKLASSEN
EU (EN 13501-1):
B-s1,d0
FR (NF):
M1
Marine-zertifiziert nach MED
Auf Anfrage kann der ISO SLEEVE 25 auch mit einer 50 mm Isolierschicht bestellt werden, die Artikelnummer wird dann DHB50{Ø}.
R-Wert Isolierwolle: 1.3 (50 mm) m² K/W (ASTM C177-76).
Trennfolie
Isolierwolle
Außenmantel
DEC INTERNATIONAL
TECHNISCHE SPEZIFIKATIONEN
A
C
B
D
Name Item No. (25 mm Insulation) Item No. (50 mm Insulation) Item No. (75 mm Insulation)
DIS 100 84789 87548 237572
DIS 125 85034 87549 237573
DIS 160 87546 87562 247443
DIS 200 87547 87563 –
DIS 250 87620 87621 –