Original instructions PF Smart SE .... 9 NL .... 60 EN .... 19 NO .... 28 DE .... 38 FR .... 49 FI ....71 RU ....81 ES ....92 PL ....
PFS 2 SE Introduktionssidorna består huvudsakligen av bilder. För översättning av de engelska texter som används, se respektive språksidor. EN The introduction pages consist mainly of pictures. For translation of the English texts used, see the respective language pages. NO Introduksjonssidene består hovedsakelig av bilder. For oversettelse av de engelske tekstene, se de respektive språksidene. FR Les pages de présentation contiennent principalement des images.
PFS PFS 450 / 660 / 940 325 10 105 Fig. 1 min 100 min 100 min 100 Fig.
PFS Mounting with wall bracket Possibility to use guide holes for easy positioning A B 10 cm Align the wall bracket C Fig. 3: Mounting wall bracket A Fig.
PFS 113 Mounting when a connection box is to be placed behind the unit PFS4/10/17 - 214/434/712 40 30 Fig. 5: Free space to mount the connection box behind the unit 1 2 3 Fig. 6: Bending the wall bracket Portable use A B Fig.
PFS 2 A B Fig. 8: Open the unit 1 DISPLAY BOARD 12VDC 90°C Jumper 60/90°C 60°C RF In OUTLET SENSOR °C Overheat protection OL L N ON Fig. 9: Changing the maximum surface temperature from 90 °C to 60 °C by removing the jumper. Default 90 °C.
PFS Accessories PFSS4 PFSE4 PFSS10 PFSE10 PFSS17 PFSE17 PFSRF PFSE, PFSD PFSH PFSE, PFSD PFSS PFSRF PFSH 3 Electrical heat 230V~ PFSE Type PFSE4 PFSE10 PFSE17 Output Airflow Voltage [m3/h] Sound level* [dB(A)] [W] 400 1000 1750 Weight [V] Amperage Output LxHxD Motor (12V) [A] [W] [mm] 40/60 60/100 100/150 26,5/37 28/38,5 29/40,5 230V~ 230V~ 230V~ 1,8 4,4 7,6 4,1 5,8 8,1 Voltage Amperage Output LxHxD Motor (12V) [A] [W] [mm] Weight 1,0 2,5 4,4 4,1 5,8 8,1 1,2 1,8 3,0 450x3
PFS PFSE / PFSD DISPLAY BOARD 12VDC 90°C Jumper 60/90°C 60°C RF In OUTLET SENSOR °C Overheat protection OL L N ON POWER BOARD 230/400V M M M 1 12VDC PFSE/D10 PFSE/D17 PFSE/D4 0 INLET SENSOR PFSD PFSE 8
PFS EN Installation and operating instructions General Instructions Read these instructions carefully prior to installation and use. Keep this manual for future reference. The product may only be used as set out in the assembly and operating instructions. The guarantee is only valid should the product be used in the manner intended and in accordance with the instructions.
EN PFS Switching surface temperature 60 / 90 °C On delivery, max. surface temperature is set to 90 °C. To select the lower surface temperature - max 60 °C, remove the jumper on the circuit board placed below the display inside the convector. 1. Disconnect the power supply. 2. The front is opened by removing the screws on the plastic ends (2x), pull the front at the bottom and then lift it up. (Fig. 8) 3. Remove the jumper. Fig. 9. 4. Reinstall the front.
PFS • Children of less than 3 years should be kept away unless continuously supervised. • Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
PFS EN PF Smart is supplied with default settings. The temperature is easily changed by pressing + or -. PF Smart can also be adapted to individual requirements, see the following pages. Default settings At the first start-up or after a longer power failure, the time needs to be set. If a week program is not to be used and the time does not need to be set, this can be overridden by pressing the OK button repeatedly until the home screen appears.
PFS Fan mode The fan speed can be set to suit any requirements. Modes: Auto/Low/High/Off. EN Fan mode Functions Auto The fan runs at low speed except: - when the room temperature is more than 2 °C below the set point, then the fan speed increases to high speed for a shorter heating time. - if it is too hot in the the unit OFF The fan is off. When Off is selected, the fan first runs during a cooling period until the right temperature is reached before it stops.
PFS EN Timer The set temperature can be changed for a limited time with the timer (1 hour to 45 days). The fan runs on the set value. User menu Select A OK Week program PFS has nine preset week programs (P1 to P9) and the possibility to add four (U1-U4). The function ITCS (default) makes the control learn when it needs to start in order to reach a certain desired temperature at a specific time in the environment it is used. It can be disabled, see Settings.
PFS EN Setting week programs Select the start time for the selected mode (Reduced/Comfort). User menu Select P P P A OK Select between Reduced mode or Comfort mode for following time. P1 or the recently used program is shown. OK Confirm OK Selecting a preset program P1 - P9 Confirm Select the start time for the selected mode (Reduced/Comfort). Select P1-P9. P Switch between days of the week with the arrow to view times for the selected program. 1 = Mon to 7 = Sun.
PFS EN Settings User menu Select P A OK Power failure Note! A power loss longer than 12 hours may require an adjustment of time and date. The week program is affected if the clock is not correctly set. Confirm Browse the menu options. OK Confirm Functions Default settings Description Time (01) For week program. Time and date. Must be set if the week program is to be used. Set the following: - hour (24 h) - minute - weekday: mon=1, sun=7 - day/month - year Increase/decrease with +/-.
PFS EN Troubleshooting Symptom Cause Action The fan symbol is flashing. No heat and the fan runs at maximum speed. The internal temperature has exceeded • Check that the air flow is not the upper limit, even though the heat blocked at the intake grille or is off. The fans automatically run at the outlet grille. highest speed and the heat is blocked • Clean the inside of the unit.
Tel: +46 31 336 86 00 mailbox@frico.se www.frico.net For latest updated information and information about your local contact: www.frico.net. Art.