FC101 Programming Guide

Parameter Range Default Usage
Parameter 30-23 Locked Rotor
Detection Time [s]
0.05–1.00 s 0.10 s
–
Table 2.5 Set-up Wizard for Closed-loop Applications
Motor set-up
The motor set-up wizard guides users through the needed motor parameters.
Parameter Range Default Usage
Parameter 0-03 Regional
Settings
[0] International
[1] US
0 –
Parameter 0-06 GridType [0]–[132] see Table 2.4. Size related Select the operating mode for restart after reconnection of
the frequency converter to mains voltage after power-
down.
Programming Programming Guide
MG18B502 Danfoss A/S © 04/2018 All rights reserved. 21
2 2