Quick guide TAP16R

LED

Select button [ ]

Day

Time

Temp

Selected control

Arrow buttons [ ]

Getting started Using the menu

Exit the menu*

4 secs

Turning o and on Locking the keypad

4 secs

Navigate

To standby*

Out of standby

Quick guide TAP16R

Get started quickly and easily! Here you have a guide to the most important functions and

settings, an introduction to the energy saving programs and an overview of the menu

system.

Always read the full manual for complete product information.

Start the menu

Navigate through

the options

*The heat is not being regulated. The clock is running

and the programming is saved in the memory.

This is what the display looks like when you rst

start TAP16R.

Lock

Unlock

*Or wait 30 secs and exit automatically.

4 secs

www.frico.se/en

PAGE 1
Quick guide TAP16R Get started quickly and easily! Here you have a guide to the most important functions and settings, an introduction to the energy saving programs and an overview of the menu system. Always read the full manual for complete product information. Getting started Using the menu This is what the display looks like when you first start TAP16R.
PAGE 2
Basic settings Time and date To be able to use all the functions you need to set the time and date first. Navigate to the correct time* *Repeat the last two steps to set minutes, day, month and year. The correct day of the week is set automatically. Desired temperature Show actual temperature Lock buttons first Temperature, external sensor* * If the thermostat is set to external sensor, otherwise temperature in the room (R).
PAGE 3
Energy saving programs Save energy cleverly and easily! With these programs the heating is adapted to your actual needs and the heat is turned down when it isn’t needed.
PAGE 4
Sitemap of the menu This is how the menu in TAP16R is structured. Here you can quickly see where all the functions and settings are. CONT Set the display’s contrast 1-8 PROG Start/stop program UTIL Show connected time in % Home program 24 HR Office program 7D Personal program 30 D Frost protection program 365 D SET Various settings S Turn off and set to automatic change to DST RNF Set which sensor will control the temperature.