cat frico infraduo gb 181213

ManualsBrandsSystemair ManualsHeatingIHD20 Infrared Heater - Infraduo, 2000W, 2x3,5W LED, 230V, IP65

2–3,5 m1,8-2,5 m

45° (+/- 10°)

1000

500

1000

Infraduo

Halogen infrared heater with the perfect combination of heating and lighting

• Fitted with dual LED spotlights (2x3.5W) which can be

rotated through 180°.

• Heating and lights are controlled individually.

• Halogen lamp with gold infrared tube and polished

aluminium reﬂector.

• High protection class, IP65.

• Wall bracket included. Other mounting alternatives are

available as accessories, e.g. ceiling bracket and ﬂoor stand.

• Polished aluminium housing.

Infraduo IHD is a halogen infrared heater

incorporating LED spotlights at each end, making

it very practical for all situations where both

heating and light is required.

The LED spotlights can be rotated through 180°

and are controlled separately from the heating.

Infraduo has an attractive design in polished

aluminium alowing easy placement in any

environment. With its high IP class, it is also

suitable for use in high humidity conditions.

Infraduo (IP65)

Installation height Minimum distances

1,5 kW: 1800

2 kW: 2100

1,5 kW: 150

2 kW: 200

Flammable material

Design and speciﬁcations are subject to change without notice.

Infraduo

Type Heat output

[W]

Voltage

[V]

Max. ﬁlament

temperature

[°C]

Dimensions

LxHxW

[mm]

Weight

[kg]

IHD17 1650 230V~ 1800 825x140x97 3,4

IHD20 2000 230V~ 1800 825x140x97 3,4

2018-12-12

Summary of content (3 pages)

PAGE 1
Infraduo Infraduo Halogen infrared heater with the perfect combination of heating and lighting Infraduo IHD is a halogen infrared heater incorporating LED spotlights at each end, making it very practical for all situations where both heating and light is required. The LED spotlights can be rotated through 180° and are controlled separately from the heating. Infraduo has an attractive design in polished aluminium alowing easy placement in any environment.
PAGE 2
Infraduo Dimensions L-bracket included 412 140 97 825 220 Positioning, mounting and connection Positioning Outdoors The heaters must be placed so that they cover the area to be heated, see fig. 1. The normal mounting height is 2–3 metres above the ground/floor. A rule of thumb for infrared heaters is that 600–800 W/m² increases the experienced temperature by about 10 °C. The output demand can be reduced if the area to be heated is protected.
PAGE 3
Infraduo Control options Timer control The timer can be set to a desired time. If the current load exceeds the timer’s setting range or if you want to control a larger system, a contactor can be used. • CBT, electronic timer Comfort control The comfort controller allows you to wirelessly control one or more infrared heaters via an app (iOS or Android) or by using the remote control supplied. The IHBD3 offers stepless control via the Frico Infra app, or 5 step regulation when using the remote control.