Infrapalm IHPA GB .... 3 DE .... 6 SE ....11 NL .... 14 FR ....
Infrapalm IHPA GB ASSEMBLY AND OPERATING INSTRUCTIONS Dear Customer, please read the following information carefully before using the appliance for the first time for your own safety and to ensure correct use. Safety information These instructions belong to the appliance and must be kept in a safe place. If changing owners, they should be surrendered to the new owner. • The appliance should be used only in the way described in this instruction manual and may be used outside, even in wet conditions.
Assembly of the heater GB 4 Infrapalm IHPA
Infrapalm IHPA A: The cast-iron base Lay the cast-iron base on a horizontal plane. Screw the six leveling bolts (1) into the holes in the base with the use of a hexagon socket wrench. If the base is to be fixed to the ground after assembly, use only three leveling bolts interspersed with fixing bolts. B: Attaching the steel tubes to the base Screw steel tube (2) into the base and tighten. (A steel bar is provided for this purpose.
Tel: +46 31 336 86 00 mailbox@frico.se www.frico.net For latest updated information and information about your local contact: www.frico.