Topvex FR03 11 Installation instruction 151625 CE A005

Installation |
13
7 Open hatch
Open the hatch by unlocking the 2 inner handles (pos.
1) followed by the 2 outer handles (pos. 2). The hatch
can now be pushed toward the centre of the unit. On-
ly one hatch at the time can be opened like this.
8 Apply seal
Apply the enclosed self adhesive seal strip to the in-
ner frame of the unit casing.
9 Close hatch
Close the hatch with the 4 handles. Make sure the
hatch closes properly.
Repeat the procedure from step 7 on the other hatch.
10 Remove Handles
After the hatch is closed, the handles need to be re-
moved before the unit is put in operation.
Warning
The door handles are only intended to be
used during the installation. Handles must
be removed before the unit is put into
operation to ensure the required level of
safety for the unit.
151625 | A005