QUICKGUIDE ACCESS SW 4 0 1 04 TO 4 6 1 00 151671A011

4
| Alarms
1.5 User levels
End user
When logged out
Read /write privileges — Home page
Possible actions in end user mode are to stop the air handling unit for
maintenance (e.g. filter exchange), change the time for extended run and
change the temperature setpoint.
Flow diagram and active alarms in alarm list are visible.
Operator mode — log in
with 1111
Logged in
Read and write privileges (except Configuration).
Acknowledge/block/unblock alarms and view the alarm history.
Service mode — log in
with 0612
Logged in
Full read and write privileges.
2 Alarms
A LED-light in the NaviPad button indicate the status of the air handling unit.
• Fixed green — Status ok (no active alarms).
• Flashing red — Active/returned alarms in one or several air handling units or lost connection with an air handling
unit.
• Fixed red — Acknowledged/blocked alarms in one or several air handling units, alarms not reset.
Different alarm levels
Class A alarm
Needs to be acknowledged
Class B alarm
Needs to be acknowledged
Class C alarm
Returns when the cause of the alarm disappear
2.1 Alarm list
Note:
Minimum Operator level to be able to acknowledge or handle alarms.
Data & Settings > Alarm list
24 Jun 10:31
Acknowledge all
No
Name:
Level:
Status:
Filter guard 1
Alarmed
Show all alarms
>
Alarm history
>
Alarm snapshot
>
151671 | A011