Topvex FR03 11 Installation instruction 151625 CE A005

Installation |
9
5.3 Installing the unit
The unit can be installed in the following positions
Fig. 5 Possible installation positions
Position Description
A
Installation flat on the ground. Left and right connections are possible.
B
Ceiling installation. Left and right connections are possible.
C
Vertical wall installation with the supply air upward.
D
Horizontal wall installation Left and right connections are possible.
Note:
The unit may not be installed with the electrical connection box facing downward!
E
Vertical wall installation with the supply air downward, not allowed.
Arrow symbol description (table 3).
Installation according to A-D
Warning
Beware of sharp edges during mounting and maintenance. Make sure that a proper lifting device is used.
Use protective clothing.
1 Prepare the surface where the unit is to be mounted.
Make sure that the surface is flat, levelled and that it
supports the weight of the unit. Perform the installa-
tion in accordance with local rules and regulations.
2 Lift the unit in place.
3 Connect the unit electrically to the mains power sup-
ply through the all pole circuit breaker, safety switch
(accessory). The wiring is led through the gable to the
electrical connection box.
See enclosed wiring diagram, and chapter 5.6.6 for
more information.
151625 | A005