QUICKGUIDE ACCESS SW 4 0 1 04 TO 4 6 1 00 151671A011
Table Of Contents
6
| Controller settings
3.1.2 In- and output status
I/O status
Total overview of:
• Sensors
• I/O
• Fan control
• Temperature sequencing
• Running mode
• Device status
All can be controlled in manual mode.
• Manual setting of temperature sensor
• Locking of fans at adjustment
• Manually I/O testing of external functions
• Raw values
3.1.3 Energy insight
Logs and presents energy data:
• Energy usage and SFP for fans
• Recovered energy for exchanger
3.1.4 Temperature control
Settings for temperature.
• Limit values
• Setpoint for current control type (Example 1)
• Min/max limitation
• Outdoor temperature values
Example 1: Setpoint for current control type
Data & Settings > Temperature control > Supply air controller
24 Jun 10:31
Supply air temperature
10.4 °C
Setpoint adjustment
0 °C
Setpoint adjustment low speed
0 °C
Setpoint adjustment high speed
0 °C
Setpoint Supply air
18 °C
Example show temperature control type set to supply air. To change the setpoint, press on the current value and
change to desired setting in the following pop-up menu. Confirm with ok. (Editable text and values are shown in blue
on NaviPad.)
151671 | A011