IMO MRH
Important safety information
MRH 18.08.2022 5
WARNING
Hazard from hot surface!
This warning identifies situations with a danger from overheating. Failure to comply with this warning po-
tentially leads to property damage.
1.1.2 List of instructions for action
Instruction for action
Carry out this action.
(if applicable, further action)
1.2 Notes on the documentation
WARNING
Hazard as a result of improper dealing with the device
These operating instructions describe safe use of the device.
Read the operating instructions carefully! The personnel dealing with the fan must read and under-
stand the operating instructions.
Keep the operating instructions with the device. They must be permanently available at the place of
use.
2 Important safety information
2.1 Safety notes
Designers, installers and operators are responsible for the proper mounting and intended use.
Only use the device in a proper condition.
Provide generally prescribed electrical and mechanical protective devices.
During mounting, commissioning, maintenance and control, secure the place of mounting against unauthorised
access.
Observe rules for safe work. Protective working gloves, protective working shoes, safety goggles, safety helmet are
part of personal protective equipment. Depending on object, additional protective equipment may be necessary.
Safety components must not be by-passed or put out of function.
Keep all the warning signs and nameplates on the device complete and readable.
Regularly instruct the personnel about safety-conscious behaviour. Requirements for personnel – see 2.2. The ap-
pliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities.
NOTE
We have carried out a risk assessment for the device. However, it can only apply to the device itself. After
installation of the device, we recommend to carry out a risk assessment for the whole system. In this way,
you have the guarantee that there is no risk potential from the system. Compliance with EMC Directive
2014/30/EC only relates to these products when they have been connected directly to the customary en-
ergy supply mains.
2.2 Personnel
2.2.1 Mounting personnel
Mounting may only be carried out by trained, qualified personnel.