DataSheet S SA2 S SA2L201905

Rectangular Smoke Dampers | 13 / 24
Accessories
D1-S-SA2
Duct Extension with Mesh for S-SA2
Description
This accessory is available only for S-SA2 and must be used in situations where the duct ends right after the smoke
damper installed in the wall or ceiling. Its mesh will cover the blade from any damage done by foreign objects during
smoke extraction.
Design
This duct extension is designed in one length and is made of riveted sheet metal. The anges t the S-SA2 exactly.
The mesh is made of punched sheet metal with a grid of 10 × 10 mm and 2 mm spacing and has 69% free area.
This accessory is delivered as a standalone product and must be mounted on the actuator side anges
of the S-SA2 damper after the damper installation.
Fig. 6: Dimensions of the D1-S-SA2 accessory (from left to right: ange side, side view, mesh side, mesh detail)
Dimensions
10 × 10
2
(W + 60) × (H + 60)
W × H W × H305
(W + 65) × (H + 65)