Installation manual BF Silent

10
WITH HUMIDISTAT & TIMER
Thefanisequippedwithahumiditydetector,whosethresholdisadjustablefrom50%to
95%RelativeHumidity,andwithatimerwhichisadjustablefromaprox.1minuteto25
minutesviacorrespondingtrimmer(g.15D).
TurnthetrimmerHYcompletelyclockwiseandthehumidistatfunctionisdeactivated.
Automatichumidistatoperation:connectedaccordingtothediagraming.14D,when
the percentage of Relative Humidity exceeds the pre-set intervention threshold, the
fanstartsupautomatically.WhenthepercentageofRelativeHumiditygoesbelowthe
threshold, the fan continues to function for a pre-set period of time.
Operationwithswitchconnection:connectedaccordingtothediagraming.14D,after
thelightisswitchedon,thefanactivateswithadelayofaprox.1.5seconds.Afteritis
switchedoff,thefancontinuestofunctionforapre-setperiodoftime.
Attention: When the relative humidity level is higher than the pre-set threshold,
automaticoperationwithhumidistathaspriorityovermanualoperation,orratherthefan
cannotbestoppedviaswitch.
2014/35/ECLowVoltageDirective(LVD)
2014/30/ECElectromagneticCompatibility(EMC),
inconformitywiththefollowingstandards:
ElectricalSafety:EN60335-1(2012)+A11+A13;EN60335-2-80(2003)+A1+A2.
ElectromagneticCompatibility:EN55014-1(2017);EN55014-2(2015);EN61000-3-
2(2014);EN61000-3-3(2013).
STANDARD CONFORMITY