IMO DVG

28 DVG 16.08.2021
The Manufacturer:
Systemair d.o.o.
Špelina 2
SI-2000 Maribor
Tel.: [phone]
certifies herewith that the following
Smoke and heat extract fans, type DVG/F400*, DVG-EC/F400*
Thermo roof fans, type DVG-T, DVG/120
ensure all relevant regulations of following directives:
DVG/F400
DVG-EC/F400
DVG-T
DVG/120
Supply of Machinery (Safety) Regulations 2008
x
x
x
x
Electromagnetic Compatibility Regulations 2016
x
x
x
x
Electrical Equipment (Safety) Regulations 2016
x
x
x
x
Construction Products (Amendment etc) (EU Exit) Regulati-
ons 2019
x
x
----
----
Ecodesign for Energy-Related Products and Energy Informa-
tion (Amendment) (EU Exit) Regulations 2020
x
----
----
x
Commission Regulation (EC) No 327/2011 (Fans)
x
x
----
x
Applied harmonized standards, in particular:
DVG/F
400
DVG-
EC/F400
DVG-T,
DVG/120
EN ISO
12100
Safety of machinery - General principles for design - Risk asses-
sment and risk reduction
x
x
x
EN ISO
13857
Safety of machinery - Safety distances to prevent hazard zones
being reached by upper and lower limbs
x
x
x
EN 60204-1
Safety of machinery - Electrical equipment of machines - Part 1:
General requirements
x
x
x
EN 12101-3
Smoke and heat control systems – part 3: Specification for po-
wered smoke and heat exhaust ventilators
x
x
----
*complies with the provisions of the Test reports, issued by the LGAI Technological Center, S.A., Bellaterra
(Barcelona), No. 09/100216-502 from 12. 06. 2009 and No. 11/2673-1035 from 14. 06. 2011(DVG), No. 11/3662-
2628, 2629 from 09. 01. 2012 and No. 12/3662-441 from 19. 03. 2012 (DVG-EC), No. 14/3662-456 from 25. 03. 2014
(DVG, DVG-EC)
Note1: The compliance with Supply of Machinery (Safety) Regulations 2008 and EN ISO 13857 refers to the mounted
protective guards on the inlet of the fan, as far they are in the extent of delivery. For the fully accordance with men-
tioned requirements (protective guards or safety assurance in other way) the performer is responsible.
Note2: Compliance with Electromagnetic Compatibility Regulations 2016 only relates to this product if it has been
connected directly to the customary electricity mains. If this product is integrated into a system or completed and
operated with other components (e.g. regulation and control appliances), the manufacturer or operator of the overall
system is responsible for compliance with Electromagnetic Compatibility Regulations 2016.
Maribor,
16.08.2021
Date
Anton Zupančič, Director
UKCA – Declaration of Conformity