DataSheet CAP G201906

4 / 20 | Nozzle Diffusers
Design
The CAP-G body is made from galvanized steel, composed of the backing box with a vertically oriented rubber gasket
sealed circular connection and diffuser plate with polymer nozzles, attached by spring clips.
The nozzles can be rotated by 360° in the plane of the diffuser plate. The proper directional adjustment
of the individual nozzles results in the desired air discharge pattern. For the installation of the diffuser, there are holes
in the backing frame for screws to x in the false ceiling board
Product Parts
Fig. 2: Components of CAP-G
1 Backing box
2 Connection with rubber gasket
3 Spring clips for diffuser plate xing (inside the backing box)
4 Diffuser plate
5 Nozzles
6 Safety cable (inside the backing box)
Legend
6
4
5
3 2 1