DataSheet OPTIM201910 en GB
Table Of Contents
Variable Air Volume Controllers | 1 / 24
Description
OPTIMA-RES-A is a compact system of supply
and extract VAV controllers intended for ventilation
control of residential premises. The basic functionality
is continuous supply and extract air ow volume control
in master/slave operation mode. Additionally, it can be
switched into override operation modes like open
or close damper, or minimum or maximum air ow
volume control.
Highlights
• Complete VAV supply and extract master/slave solution
• AC 230 V power supply
• Electrical safety elements and connection terminals
on board
• Noise attenuators included
• Fit for installation on surface or into gypsum walls
or ceilings
• VAV controllers can be easily detached and mounted
in other supply/extract conguration
List of Accessories
Detailed information about accessories
for OPTIMA-RES-A is available
on page 5.
• RC-C3DOC: Room Controller
• MZ3-Touch: Ventilation Control Panel
• EC-Basic – CO2 + Temperature Room Controller
• CO2RT: CO
2
Room Transmitter
• ZTH-EU: Service Tool for VAV Controllers
Design
The system of OPTIMA-RES-A system is encased
in a galvanised steel box. The system consists of:
• One supply and one extract variable OPTIMA-R air ow
controller in a circular galvanised steel body
• Electric part with power supply and control circuitry
• Acoustic attenuation
The VAV controllers are mounted to the circular duct
connections by sleeves, so the VAV controllers are easily
removable. The system box is equipped with cable pass
diaphragms for cables related to power supply, setpoint
control signal, feed-back signal and override signal.
These cables shall be connected by a service person
on site. The corresponding terminals are available
according to the wiring diagram.