dop axc(f)009

Declaration of Performance
1 (4)AXC(F) / F400 (120)/315-1.600 mm_009
AXC(F) / F400 (120)/315-1.600 mm_009
GB
1
Unique identification code of the
product-type:
AXC 315...1.600
1
-x/y°-z (F)
2
1
Nominal diameter of the fan
x: Number of blades
y°: Blade angle
z: Number of poles
2
tested 400 °C / 2 h
All Systemair AXC fans with the identifier (F) have the performance stated
in this document.
2
Serial number see name plate of the fan
3
Intended use: Mechanical smoke and heat extraction device
4
Manufacturer: Systemair GmbH; Seehöfer Straße 45; 97944 Boxberg; Germany
6
System of AVCP:
System 1
7
Harmonised standard:
Notified body:
The international research laboratory BSRIA in Bracknell; UK (authorised
testing authority N° 0480) has determined the characteristics of the
product after an initial test. The authorised testing authority BSI (N° 2797
and N° 0086) has carried out an initial factory inspection and a factory
production control according to system 1 of the Construction Products
Regulation (Regulation (EU) No 305/2011). The testing authority carries out
ongoing monitoring, assessment and evaluation of the factory production
control and issued the following certificates of performance:
• 2797-CPR-719672 (EU)
• 0086-CPR-719672 (UK)
8
Essential Characteristics ():
Response delay:
Opening under wind load within a
given time.
NPD (No Performance Determined)
Opening under snow load within a
given time.
NPD
Operational reliability
Application categories
see Annex 1
Motor rating
ISO H
Effectiveness of smoke / hot gas extraction
Gas flow maintenance during
smoke and heat extraction test.
+/- 10 %
Pressure maintenance during
smoke and heat extraction test.
+/- 20 %
Systemair·GmbH,·Seehöfer·Straße·45,·97944·Boxberg,·Germany
Phone: [phone] Fax: [phone] -en_GB-