Installation and maintenance manual Manuel d’installation et de maintenance Installations- und Wartungshandbuch Manuale di installazione e di manutenzione Manual de instalación y de mantenimiento SyScroll 240-660 Air CO/RE/HP/TR English 238 654 kW 256 679 kW Français Deutsch Italiano Español Air Cooled Water Chillers and Heat Pumps Refroidisseurs de liquide à condensation par air et pompes à chaleur air-eau Luftgekühlte Flüssigkeitskühler und Wärmepumpen Refrigeratori d’Acqua e Pompe di Calore Raffre
1 - FOREWORD 7 - PRODUCT DESCRIPTION 1.1 Introduction...........................................................................2 7.1 General Information.............................................................30 1.2 Warranty...............................................................................2 7.2 Body and Frame..................................................................30 1.3 Emergency stop/Normal stop................................................2 7.3 Compressors.............
11--Introdução Foreword 1.1 Introduction 1.3 Emergency stop / Normal stop Units, manufactured to state-of-the-art design and implementation standards, ensure top performance, reliability and fitness to any type of air-conditioning systems. The emergency stop of the unit can be enabled using the master switch on the control panel (move down the lever). For a normal stop, press the relevant push-buttons.
English 2 - Safety 2.1 Foreword These units must be installed in conformity with the provisions of Machinery Directive 2006/42/EC, Pressure Equipment Directive 2014/68/EU, Electromagnetic Compability Directive 2014/30/EU, as well as with other regulations applicable in the country of installation. If these provisions are not complied with, the unit must not be operated.
2 - Safety (continued) disassemble connections, filters, joints or other line items 2.2 Definitions OWNER: means the legal representative of the company, body or individual who owns the plant where unit has been installed; he/she has the responsibility of making sure that all the safety regulations specified in this manual are complied with, along with the national laws in force.
n periodically check the board’s internal wiring n n do not use cables having an inadequate section or flying connections, even for limited periods of time or in an emergency place a warning sign “do not turn on - maintenance in progress” on the external disconnecting switch n make sure that on-off remote controls are inhibited n wear suitable personal protective equipment (helmet, safety gloves, goggles and shoes etc.
2 - Safety (continued) 2.7 Safety labels Identification of the refrigerant - External door Instruction for the lifting Identification of the unit Outside, on the right-hand front column CODICE PRODOTTO NEUTRO PRODUCT CODE MODELLO MODEL 0425 MO.NO MATRICOLA SERIAL NO. ANNO DI COSTRUZIONE Sequence phase control on the electrical board Manuf. Year REFR.
Electrical warning Adjacent to the master switch Grounding connection on the electrical board, adjacent to the connection ATTENZIONE ! ATTENTION ! ACHTUNG ! Prima di Enlever aprire togliere l’alimentation tensione electrique avant d’ouvrir CAUTION ! ATENCION ! Vor Öffnen des Disconnect Cortar la corrente antes Gehäuses electrical de abrir Hauptschalter supply before el aparato betätigen opening Start-up warning - Outside the door of the electrical board Read the instruction on the electrical board A
2 - Safety (continued) 2.8 Safety regulations REFRIGERANT DATA Toxicity SAFETY DATA: R410A Low If sprayed, the refrigerant is likely to cause frost burns. If absorbed by the skin, the danger is very limited; it may cause a slight irritation, and the liquid is degreasing. Unfreeze the affected skin with water. Remove Contact with skin the contaminated clothes with great care - in the presence of frost burns, the clothes may stick to the skin. Wash with plenty of warm water the affected skin.
2.8 Safety regulations (continued) REFRIGERANT DATA General precautions Respiratory system protection SAFETY DATA: R410A Do not inhale concentrated vapours. Their concentration in the atmosphere should not exceed the minimum preset values and should be maintained below the professional threshold. Being more weighty than the air, the vapour concentrates on the bottom, in narrow areas. Therefore, the exhaust system must work at low level.
2 - Safety (continued) 2.8 Safety regulations (continued) LUBRICANT OIL DATA SAFETY DATA: POE/PVE OIL Classification Not harmful. Contact with skin May cause slight irritation. Does not require first aid measures. It is recommended to follow usual personal hygiene measures, including washing the exposed skin with soap and water several times a day. It is also recommended to wash your overalls at least once a week. Contact with eyes Wash thoroughly with a suitable solution or tap water.
Refrigerators are supplied assembled (apart from standard antivibrating rubber supports, that will be installed on site). The equipment are full of refrigerant and oil, in the quantity required for a proper operation. It is recommended to use a spacer to prevent cables from damaging the unit (see the figure). 3.1 Inspection When the unit is delivered, it is recommended to check it carefully and to identify any damage occurred during transportation. The goods are shipped ex-factory, at the buyer’s risk.
3 - Transport, Lifting and Positioning (continued) The eyebolts must be mounted on the unit whenever it shall be displaced and then lifted again. During the lifting and handling of the unit, be careful not to damage the finned pack of the coils positioned on the sides of the unit. WARNING WARNING WARNING 3.3 Anchoring The sides of the unit must be protected by cardboard or plywood sheets.
4.1 Positioning of the unit DANGER 4.2 Spring Isolator Installation Before installing the unit, make sure that the structure of the building and/or the supporting surface can withstand the weight of the appliance. The weights of the units are listed in Chapter 8 of this manual. n Prepare the base, that must be flat and plane. n Lift the appliance and insert shock absorbers as follows: These units have been designed for outdoor installation on a solid surface.
4 - Installation (continued) 4.3 External Water Circuit The expansion tank shall be dimensioned in such a way that it can absorb a 2% expansion of the total volume of the water in the plant (exchanger, pipelines, uses and storage tank, if available). The flow switch and the filter water, although not included in the supply, must always be fitted such as plant components. Their installation is mandatory for warranty.
English 4 - Installation (continued) Hydraulic Circuit Diagram - Basic Unit A D 12 5 C G 11 10 8 1 13 8 FS B COMPONENTS 1 Plate heat exchanger 2 Pump 3 Draining valve 4 Water buffer tank 5 Water filter 6 Non-return valve 7 Pressure expansion tank 8 Pressure point/drainage 9 Water outlet 10 Water inlet 11 Globe valve 12 Flexible pipes 13 By pass valve SAFETY/CONTROL DEVICES A Inlet water temperature sensor B Outlet water temperature sensor C Water differential pressure switch D Vent valve E Wa
4 - Installation (continued) Hydraulic Circuit Diagram - 1P Unit C E D A 7 2 12 5 G 11 10 8 1 13 8 FS B COMPONENTS 1 Plate heat exchanger 2 Pump 3 Draining valve 4 Water buffer tank 5 Water filter 6 Non-return valve 7 Pressure expansion tank 8 Pressure point/drainage 9 Water outlet 10 Water inlet 11 Globe valve 12 Flexible pipes 13 By pass valve SAFETY/CONTROL DEVICES A Inlet water temperature sensor B Outlet water temperature sensor C Water differential pressure switch D Vent valve E Wate
English 4 - Installation (continued) Hydraulic Circuit Diagram - 2P Unit 6 2 E D A 7 12 5 C 1 G 11 10 8 13 6 FS B COMPONENTS 1 Plate heat exchanger 2 Pump 3 Draining valve 4 Water buffer tank 5 Water filter 6 Non-return valve 7 Pressure expansion tank 8 Pressure point/drainage 9 Water outlet 10 Water inlet 11 Globe valve 12 Flexible pipes 13 By pass valve 11 2 8 SAFETY/CONTROL DEVICES A Inlet water temperature sensor B Outlet water temperature sensor C Water differential pressure switc
4 - Installation (continued) Hydraulic Circuit Diagram - 1P+T Unit D A 2 C 1 E 7 12 5 G 11 10 8 13 11 11 8 4 B FS D 3 Y COMPONENTS 1 Plate heat exchanger 2 Pump 3 Draining valve 4 Water buffer tank 5 Water filter 6 Non-return valve 7 Pressure expansion tank 8 Pressure point/drainage 9 Water outlet 10 Water inlet 11 Globe valve 12 Flexible pipes 13 By pass valve SAFETY/CONTROL DEVICES A Inlet water temperature sensor B Outlet water temperature sensor C Water differential pressure switch D V
English 4 - Installation (continued) Hydraulic Circuit Diagram - 2P+T Unit D A 6 2 E 7 12 5 C 1 G 11 10 8 6 11 13 2 8 B 4 FS D 3 Y COMPONENTS 1 Plate heat exchanger 2 Pump 3 Draining valve 4 Water buffer tank 5 Water filter 6 Non-return valve 7 Pressure expansion tank 8 Pressure point/drainage 9 Water outlet 10 Water inlet 11 Globe valve 12 Flexible pipes 13 By pass valve SAFETY/CONTROL DEVICES A Inlet water temperature sensor B Outlet water temperature sensor C Water differential pr
4 - Installation (continued) 4.4 Water connections WARNING It is important that the appliance is grounded. The attachments at the water inlet and outlet shall be connected in compliance with the instructions which can be found on the labels in the proximity of the attachments. DANGER Connect the water lines of the plants with the attachments of the unit whose diameters and positions are shown by Chapter 8. DANGER 4.
4.7 Electrical connections The maximum % value of these differences (unbalance) must not exceed 2% of the mean voltage. The unit must be installed on site according to the Machinery Directive 2006/42/EC, Electromagnetic Compatibility Directive 2014/30/EU and the usual procedures and standards applicable in the place of installation. If the unbalance is unacceptable, contact the Energy Distributor to solve this problem.
4 - Installation (continued) Electrical Connections Note: For the other version refer to documentation attached to machine.
WARNING The unit must be started for the first time by personnel suitably trained by one Authorised Service Centre. Failure to meet this requirement will immediately void the warranty. n Start the pump and check that the water flow is correct. n Set the desired fluid temperature on the control board. n Start the appliance (see Chapter 6). n Check the correct direction of rotation of compressors. Scroll compressors cannot compress the refrigerant when they rotate in the opposite direction.
6 - Control 6 General information The control system consists of: Keyboard & Display Terminal Introduction General information This document contains the information and the operating instructions for units equipped with 3/4/5/6 compressors. The figure shows the terminal with the front door open. This information is for the after-sales service and the production operators, for the end-of-line testing.
6.2 Display Esc key: allows you to move from one mask to another. Alarm key: used to display the alarms, to reset them in manual. Press it one to display the mask of the activated alarm, press it again to reset the alarm signal. + Prg+Esc keys: Pressing these keys at the same time,allows you to turn the unit on/off. Up-down keys: allows you to set the control parameters’ values and to move from one mask to another (not backlighted). The display is an LCD 4 lines x 20 columns.
6 - Control (continued) Alarms Alarm code 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 56 57 59 60 Description Main board - EPROM Failure Main board - Clock card Failure Main board - External air temperature sensor fault Main board - Return Water temperature sensor fault Main board - Leaving Water temperature sys 1 sensor fault Main board - Leaving Water temperature sys 2 sensor fault Main board - Low pres
Alarm code 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 Description EPROM Error Driver 1 EPROM Error Driver 2 Driver 1 S1 Sensor fault Driver 1 S3 Sensor fault Driver 1 S2 Sensor fault Driver 1 S4 Sensor fault Driver 2 S1 Sensor fault Driver 2 S3 Sensor fault EEV motor Error (Check viring) Sys 1 EEV motor Error (Check viring) Sys 2 Driver 1 Battery alarm Driver 2 Battery alarm Autotu
6 - Control (continued) 6.4 Protection and Safety Equipment Compressor protection Defrosting System (only for HP models) Compressors are equipped with a heating element to prevent oil dilution, which may result in remarkable risks of failure of compressors. The HP units are provided with an automatic defrosting system, which prevents the formation of excessive ice banks on coolant/air exchangers during heat pump operation. The windings of the compressors’ motors are provided with a thermal protection.
English 6 - Control (continued) 6.5 HPF version configuration possible to modify high static pressure. The table below shows the correspondance between chiller model, fan RPM, high static pressure. Units equipped with High pressure fan (HPF) can be set-up on the field to give the unit a specific static pressure. By entering parameter in service level - Max Speed (Vdc) - it is Size Fan Static Pressure (Pa) Fan RPM Parameter in Service Level: Max Speed (Vdc) 240-660 0 25 56 88 124 900 950 1.000 1.
7 - Product Description 7.1 General Information 7.5 Condensing/evaporating coils Units are one-block type with double refrigerant circuit. They are intended to cool down the water required for any air-conditioning application as well as any other fluid, such as for example glycol water. These units are completely assembled at works. They are equipped with all the refrigerating connections and the internal electrical wiring required for a rapid installation on the field.
English 7 - Product Description (continued) Refrigerant flow diagram - SyScroll Air CO * M A S A AT 7 1 5 S 6 G 2 B BT S EXV CONTROL 5 UNIT CONTROL D C S E F 4 3 8 COMPONENTS 1 Scroll type compressor 2 Air cooled condenser 3 Filter drier 4 Electronic expansion valve 5 Globe valve 6 Heat exchanger 7 Desuperheater (optional) 8 Sight glass SAFETY / CONTROL DEVICES A High pressure switch AT High pressure trasducer B Low pressure switch BT Low pressure trasducer C Water differential pressure
7 - Product Description (continued) Refrigerant flow diagram - SyScroll Air HP * S A A AT M 12 ON 8 11 S 9 S S B N H BT EXV CONTROL C D 5 UNIT CONTROL 6 G F 2 G 5 E NOT FOR SIZE: 240-270 7 6 6 5 10 4 S 3 6 COMPONENTS 1 Scroll type compressor 2 Air cooled condenser 3 Filter drier 4 Electronic expansion valve 5 Globe valve 6 Check valve 7 Liquid receiver 8 Four-way valve 9 Suction accumulator 10 Sight glass 11 Heat exchanger 12 Desuperheater (option) SAFETY/CONTROL DEVICES A Hi
English 7 - Product Description (continued) Refrigerant flow diagram - SyScroll Air RE * AT G 2 3 A A * S M 1 1 B D S M S S BT BT A AT 3 S CIRCUIT 1 G 2 B S D CIRCUIT 2 3 COMPONENTS 1 Scroll type compressor 2 Air cooled condenser 3 Globe valve A 3 3 SAFETY / CONTROL DEVICES A High pressure switch (40,5 bar) AT High pressure trasducer AF Access fitting sae flare 1/4” B Low pressure switch (1,5 bar) BT Low pressure trasducer D Air temperature sensor G PED pressure relief valve
7 - Product Description (continued) Refrigerant flow diagram - SyScroll Air TR * E F M A S A AT ON 10 9 1 B S 6 G 5 13 BT S 2 11 12 S D 5 EXV CONTROL UNIT CONTROL C S G 12 12 E F COMPONENTS 1 Scroll type compressor 2 Air cooled condenser 3 Filter drier 4 Electronic expansion valve 5 Globe valve 6 Heat exchange 7 Desuperheathers (optional) 8 Sight glass 9 Four-way valve 10 Heat recover 11 Liquid receiver 12 Check valve 13 Suction 4 3 8 SAFETY/CONTROL DEVICES A High pressure s
English 8 - Technical Data 8.1 Pressure drops EVAPORATOR PRESSURE DROP - SYSCROLL Air CO 240 270 290 320 360 420 470 540 590 660 Minimum flow rate l/s 8.2 9.2 9.9 10.8 12.4 14.2 16.1 18.3 20.2 22.4 Nominal flow rate l/s 11.4 12.8 13.8 15.1 17.4 19.9 22.5 25.6 28.3 31.4 Maximum flow rate l/s 19.0 21.4 23.0 25.2 28.9 33.1 37.5 42.7 47.1 52.
8 - Technical Data (continued) 8.
SyScroll Air CO _ L Power supply 240 270 290 320 V/ph/Hz Total capacity steps 360 420 English 8 - Technical Data (continued) 470 540 590 660 24-4765-82100 20-4060-800100 14-2943-6281-100 17-3350-6783-100 400 (± 10%) / 3 / 50 % 31-62100 33-67100 30-60100 27-64100 23-4669-100 25-5075-100 kg 9,5 10 10,5 11 16 20 22,5 22 26 29 19,84 20,88 21,92 22,97 33,41 41,76 46,98 45,94 54,29 60,55 REFRIGERANT Type / GWP Charge Circuit One (1) Charge Circuit Two (1) R410A / 2
8 - Technical Data (continued) SyScroll Air CO _ S Power supply 240 270 290 320 V/ph/Hz Total capacity steps 360 420 470 540 590 660 24-4765-82100 20-4060-800100 14-2943-6281-100 17-3350-6783-100 400V/3/50Hz % 31-62100 33-67100 30-60100 27-64100 23-4669-100 25-5075-100 kg 9,5 10 10,5 11 16 20 22,5 22 26 29 19,84 20,88 21,92 22,97 33,41 41,76 46,98 45,94 54,29 60,55 REFRIGERANT Type / GWP Charge Circuit One (1) Charge Circuit Two (1) R410A / 2.
SyScroll Air HP Power supply 240 270 290 320 V/ph/Hz Total capacity steps 360 420 English 8 - Technical Data (continued) 470 540 590 660 24-4765-82100 20-4060-800100 14-2943-6281-100 17-3350-6783-100 400 (± 10%) / 3 / 50 % 31-62100 33-67100 30-60100 27-64100 23-4669-100 25-5075-100 kg 27 28 40 30 42 50 52 50 64 74 56,38 58,46 83,52 62,64 87,70 104,40 108,58 104,40 133,63 154,51 REFRIGERANT Type / GWP Charge Circuit One (1) Charge Circuit Two (1) R410A / 2.
8 - Technical Data (continued) SyScroll Air HP_L Power supply 240 270 290 320 V/ph/Hz Total capacity steps 360 420 470 540 590 660 24-4765-82100 20-4060-800100 14-2943-6281-100 17-3350-6783-100 400 (± 10%) / 3 / 50 % 31-62100 33-67100 30-60100 27-64100 23-4669-100 25-5075-100 kg 27 28 40 30 42 50 52 50 64 74 56,38 58,46 83,52 62,64 87,70 104,40 108,58 104,40 133,63 154,51 REFRIGERANT Type / GWP Charge Circuit One (1) Charge Circuit Two (1) R410A / 2.
SyScroll Air HP_S Power supply 240 270 290 320 V/ph/Hz Total capacity steps 360 420 English 8 - Technical Data (continued) 470 540 590 660 24-4765-82100 20-4060-800100 14-2943-6281-100 17-3350-6783-100 400 (± 10%) / 3 / 50 % 31-62100 33-67100 30-60100 27-64100 23-4669-100 25-5075-100 kg 27 28 40 30 42 50 52 50 64 74 56,38 58,46 83,52 62,64 87,70 104,40 108,58 104,40 133,63 154,51 REFRIGERANT Type / GWP Charge Circuit One (1) Charge Circuit Two (1) R410A / 2.
8 - Technical Data (continued) SyScroll Air TR Power supply Total capacity steps 240 270 290 320 V/ph/Hz 360 420 470 540 590 660 24-4765-82100 20-4060-800100 14-2943-6281-100 17-3350-6783-100 400 (± 10%) / 3 / 50 % 31-62100 33-67100 30-60100 27-64100 23-4669-100 25-5075-100 kg 27 28 40 30 42 50 52 50 64 74 56,38 58,46 83,52 62,64 87,70 104,40 108,58 104,40 133,63 154,51 REFRIGERANT Type / GWP Charge Circuit One (1) Charge Circuit Two (1) R410A / 2.
SyScroll Air RE_ Power supply 240 270 290 320 V/ph/Hz 360 420 English 8 - Technical Data (continued) 470 540 590 660 24-4765-82100 20-4060-800100 14-2943-6281-100 17-3350-6783-100 400 (± 10%) / 3 / 50 % 31-62100 33-67100 30-60100 27-64100 kg 9,5 10 10,5 11 16 20 22,5 22 26 29 19,84 20,88 21,92 22,97 33,41 41,76 46,98 45,94 54,29 60,55 Total capacity steps 23-4669-100 25-5075-100 REFRIGERANT Type / GWP Charge Circuit One (1) Charge Circuit Two (1) R410A / 2.
8 - Technical Data (continued) 8.3 Unit electrical data SyScroll Air Rated voltage Max. absorbed power 240 270 290 320 V/ph/Hz 360 420 470 540 590 660 400 (± 10%) / 3 / 50 kW 114 128 140 150 181 213 217 246 266 295 Rated Current A 131 150 165 175 212 248 280 318 343 381 Max. current FLA A 193 219 238 253 308 357 398 454 489 545 Max.
English 8 - Technical Data (continued) Compressors electrical data Syscroll Air 240 Number Rated power kW 270 kW A A Oil pan resistor 420 470 540 590 660 3 3 3 4 4 5 5 6 6 26.7 26.7 26.7 26.7 32.7 32.5 32.5 25.6 32.5 21.1 26.7 26.7 32.7 26.7 32.7 32.5 32.50 25.6 32.5 21.1 26.7 32.7 32.7 26.7 32.7 25.6 32.5 25.6 32.5 32.7 32.7 39.0 39.0 39.0 39.0 49.0 25.6 32.5 32.5 32.5 25.6 32.5 32.5 32.5 32.5 32.5 45.0 45.0 36.1 45.0 32.0 39.
8 - Technical Data (continued) 8.
English 8 - Technical Data (continued) Condenser Water Pressure Drop Curves - SyScroll Air TR 1000 [kPa] 240-270-290 470-540 100 590-660 320-360-420 10 6,00 60,00 [l/s] Desuperheater pressure drop 1000 100 470-540 [kPa] 240-270-290 10 590-660 320-360-420 1 2,00 [l/s] 47 20,00
8 - Technical Data (continued) Available pressure head - SyScroll 240-270 Air CO 2P+T Available static pressure [kPa] 300 250 200 150 A B 100 50 0 30 35 40 45 50 55 60 65 70 75 Water Flow [m3/h] Available pressure head - SyScroll 290 Air CO 2P+T Available static pressure [kPa] 350 300 250 200 A 150 B 100 50 0 25 35 45 55 65 75 85 Water Flow [m3/h] Available pressure head - SyScroll 320 Air CO 2P+T Available static pressure [kPa] 400 350 300 250 A 200 150 B 100 50 0 25 35
English 8 - Technical Data (continued) Available pressure head - SyScroll 360-420 Air CO 2P+T Available static pressure [kPa] 300 250 200 A 150 B 100 50 0 35 45 55 65 75 85 95 105 115 125 Water Flow [m /h] 3 Available pressure head - SyScroll 470 Air CO 2P+T Available static pressure [kPa] 350 300 A 250 200 B 150 100 50 0 45 55 65 75 85 95 105 115 125 Water Flow [m3/h] Available pressure head - SyScroll 540 Air CO 2P+T Available static pressure [kPa] 400 350 A 300 250
8 - Technical Data (continued) Available pressure head - SyScroll 590-660 Air CO 2P+T Available static pressure [kPa] 300 250 A 200 150 B 100 50 0 75 95 115 135 Water Flow [m3/h] Curve A: High pressure. Curve B: Low pressure.
English 8 - Technical Data (continued) 8.5 Position of shock adsorbers and weight distribution on supports Weight distribution (kg) SYS CO y P1 P2 a C.G.Y b P3 P4 x C.G.X 240 270 290 320 360 420 240 1P-SP 270 1P-SP 290 1P-SP 320 1P-SP 360 1P-SP 420 1P-SP 240 2P-SP 270 2P-SP 290 2P-SP 320 2P-SP 360 2P-SP 420 2P-SP 240 1P-SP T 270 1P-SP T 290 1P-SP T 320 1P-SP T 360 1P-SP T 420 1P-SP T 240 2P-SP T 270 2P-SP T 290 2P-SP T 320 2P-SP T 360 2P-SP T 420 2P-SP T SYS CO y P1 P2 b2 a P4 b1 C.G.
8 - Technical Data (continued) SYS HP y P1 P2 a C.G.Y b P3 P4 C.G.
SYS HP y P1 P2 b2 a P4 b1 C.G.Y P3 P5 P6 x C.G.
8 - Technical Data (continued) 8.6 Dimensions SyScroll Air 240-270-290-320 Front view Side view VISTA FRONTALEVISTA FRONTALE FRONT VIEW FRONT VIEW 2174 3533 VISTA FRONTALE FRONT VIEW L A 165 2234 2495 B 2146 G STD A STD B C 1P/2P D DESUPERHEAT.
P2 VISTA FRONTALE FRONT VIEW Front view VISTA LATERALE SIDE VIEW VISTA FRONTALE FRONT VIEW English J36919 REV.- Dimensions SyScroll Air 360-420 VISTA POSTERIORE BACK VIEW VISTA POSTERIORE BACK VIEW Side view VISTA LATERALE SIDE VIEW 4584 4584 VISTA LATERALE SIDE VIEW 2070J36919 REV.
8 - Technical Data (continued) Dimensions SyScroll Air 470-540 VISTA FRONTALE VISTA FRONTALE FRONT VIEWFRONT VIEW VISTA LATERALE VISTA LATERALE SIDE VIEW SIDE VIEW Front view VISTA FRONTALE FRONT VIEW VISTA5635 LATERALE SIDE VIEW 5635 2146 956 584 2586 H G 2200 A 956 H G B 584 2146 52 2070 SYSCROLL AIR 470-540 586 265 HYDRAULIC A, B, C, DWATER OPTION IN F STD A I 1P/2P C L 1PT/2PT C M DESUPERHEAT.
English 8 - Technical Data (continued) Dimensions SyScroll Air 590-660 VISTAVISTA FRONTALE FRONTALE FRONT FRONT VIEWVIEW VISTAVISTA LATERALE LATERALE SIDE SIDE VIEWVIEW VISTAVISTA POS BACKB Side view Front view VISTA FRONTALE FRONT VIEW VISTA LATERALE SIDE VIEW 6688 VIS 6688 6688 L 2146 2184 (for 2184 movimentation (for movimentation only) only) 1540 1540 1148 A 1540 P5 LIFT 8x LIFT 29 8x 29 956 956 584 2104G 2104 6332 D 265 584 LIFT 8x 29 956 2104 3056 P3 P3 VISTA DALL'ALTO TOP
8 - Technical Data (continued) 8.7 Space requirements 3 MT. T. 2M T. 2M T. 2M 2M 58 T.
DANGER When the recovered refrigerant cannot be reused, return it to the manufacturer. Do not throw away the waste oil of the compressor, because it contains refrigerant in solution. DANGER The waste oil must be returned to the manufacturer. Unless otherwise specified, the operations described below may be carried out only by a trained maintenance operator. 9.
9 - Maintenance (continued) 9.3 Refrigerant charge 9.5 Condenser Do not inject refrigerant liquid into the LP side of the circuit. Be very careful, and charge the circuit properly. If the charge is insufficient, the efficiency of the unit will be lower than expected. (In the worst of cases the LP transducer may stop the unit.) The condenser’s coils consist of copper pipes and aluminium fins.
9.9 Electronic Expansion Valve 9.10 Evaporator The circuit of the unit is equipped with electronic expansion valve, with external equalizer The valve is shop-calibrated for an overheating of 5°C. Check at regular intervals that the water side of the heat exchanger is perfectly clean. To do this, measure the pressure drop, water side (see Section 8) or measure the temperature of the liquid leaving and entering the heat exchanger, and compare it to the evaporation temperature.
10 - Troubleshooting The table below lists the anomalies of operation of the unit, the relevant causes and the corrective measures. For anomalies of any other type or not listed, contact one of authorised Service Centre for technical assistance. Anomaly Cause Operation The unit continues to work, but without cooling Insufficient charge of refrigerant. Refill. The dehydrating filter is clogged. Replace. Ice on the suction line Wrong calibration of overheating. Excessive noise Increase overheating.
English 11 - Spare Parts 11.1 Spare part list The table below shows the list of spare parts recommended during the first two years of operation. Component Number Fan 1 Flow switch 1 High pressure transducer 1 Low pressure transducer 1 Expansion valve 1 Gas filter 1 4 way valve 1 Electronic main board 1 Auxiliary circuit trasformer 1 Compressor contactor 2 Pump contactor 1 Water sensor 4 Air sensor 1 Auxiliary contact 4 Driver EEV 1 Fuses 4 11.
12 - Dismantling, Demolition and Scrapping After draining operations, the piping of the hydraulic networks can be disconnected and disassembled. During the draining of the refrigeration circuits, do not let the refrigerant overflow in the surrounding atmosphere. DANGER Once they have been disconnected as specified, the packaged units can be disassembled in a single piece.
Systemair srl Via XXV Aprile, 29 20825 Barlassina (MB) Italy Tel. +39 0362 680 1 Fax +39 0362 680 693 www.systemair.com As part of our ongoing product improvement programme, our products are subject to change without prior notice. Non contractual photos. Dans un souci d’amélioration constante, nos produits peuvent être modifiés sans préavis. Photos non contractuelles. In dem Bemühen um ständige Verbesserung können unsere Erzeugnisse ohne vorherige Ankündigung geändert werden.