EDM SyScroll 40 75 Air

|
SyScroll 40-75 Air
6
Connection clamps to remote keyboard (OPTIONAL),
Clamps for boiler relay control (OPTIONAL),
Clamps for dynamic set-point compensation (4-20 mA,
0-1 V, 0-5 V, 0-10 V),
Clamps for DHW 3-way valve (ACCESSORY),
Soft-starter (OPTIONAL),
Power factor correction capacitors (OPTIONAL).
Standard equipment
Microprocessor card with 4 red digits, 18 LED, 4 buttons.
Digital pressure and temperature reading kit.
High ambient pressure control.
Sequence phase control.
Control circuit transformer 230 V/12 V.
Compressor/pump hour meter.
Main switch.
Refrigerant R410A.
PED approval.
Evaporator antifreeze electric heater.
Compressor box.
Water differential pressure switch.
Water lter.
Water ow switch.
Factory-installed option:
Coil with blue ns treatment (only HP),
Coil with “E-Coating” treatment,
Soft starter,
Electronic Expansion Valve,
Desuperheater,
Power supply without neutral,
Automatic circuit breakers,
Compressors overload protection,
Hydraulic options (1P, 2P, 1PT, 2PT),
Fan speed control kit.
Field-installed accessories
Compressor jacket,
Mechanical Gauge kit,
Water pressure switch,
In/out valve kit,
Remote On/Off control,
ModBus protocol kit for BMS,
Power factor correction capacitors,
Sequencer for up to 4 chillers installation
Remote terminal.
Antivibration kit,
Fan speed control kit.
Power factor correction capacitors.