DVkatalog uk 09 2015 V9 i
Table Of Contents
- Contents
- Air Handling Units
- Danvent DV
- About the Danvent DV
- Product Information
- Standards and Certifications
- Combination Examples
- Functions
- Damper DVA
- Damper DVB
- Mixing Damper DVM
- Mixing Damper DVP
- Compact Filter DVG
- Bag Filter DVF
- Rotary Heat Exchanger DVC
- Plate Heat Exchanger DVQ
- Run-around Coil Heat Exchangers DVR
- Heating Coil DVH
- Cooling Coil DVK
- Change-over Coil DVHK
- Integrated Reversible Heat Pump DVU-HP
- Air Humidifier DVX
- Plug Fan DVE
- Sound Attenuator DVD
- Inspection Section DVI
- Empty Section DVO
- Outdoor Air Section DVY
- Supporting Legs
- Base Frame DVZ
- Dimensions for Ducts
- Duct Connection Part DVT
Standards and Certifications
9
Danvent DV |
The Danvent DV design is based on
the demands in the following CEN
and ISO standards:
EN 305:1997
Heat exchangers. Definition and test
procedures.
EN 308:1997
Heat exchangers. Test procedures.
EN 779:2012
Particulate air filters for general
ventilation.
EN 1216:1999
Heat exchangers
EN 1751:2014
Aerodynamic testing of dampers and
valves.
EN 1886:2008
Air handling units.
Mechanical performance.
EN 13053:2011
Ratings and performance for units
and components.
EN 13779:2007
Ventilation for non-residential build-
ings. Performance requirements.
EN 60204-1:2006
Machine safety.
Electrical equipment of machines.
EN ISO 3741:2010
Determination of sound power level
in reverberation rooms.
EN ISO 5136:2009
Determination of sound power level
in a duct.
EN ISO 12100:2011
Safety of machinery.
EN ISO 12944-2:2000
Corrosion protection. Classification of
environments.
Eurovent certification
Danvent DV air handling units are
Eurovent certified. This ensures the
conformity between the calculated
performance in SystemairCAD design
programme, and the measured per-
formance at independent test labora-
tories. Certificate 07.02.339.
AHU N
o
07.02.339
DANVENT DV 10-240, TIME 10-40
ISO 9001:2008 certification
Danvent DV air handling units are
developed and manufactured in
Denmark. The Quality management
system at the factory is certified
according to the standard EN ISO
9001:2008 by Bureau Veritas
Certification.
Machinery directive
Danvent DV air handling units are
manufactured according to the safety
demands of the EU Machinery
Directive 2006/42/EF. This is con-
firmed through the issurance of cor-
responding Declaration of
Incorporation for units without unit
control system, and corresponding
Declaration of Conformity and CE
label for units with factory installed
unit control system.
Eurovent energy classification
Danvent DV air handling units are
energy classified in according to
Eurovent’s guidelines for air handling
units RS 6/C/005–2015. The energy
class expresses the unit's total energy
consumption. The energy class is cal-
culated by the design programme
SystemairCAD based on the actual
data of the designed unit.
ENERGY EFFICIENCY
Report to performance data 2014
339
2014