ERP Data+SYSPLIT WALL OUT 09 INV32 HP Q 315809
5
The display
shows
1.
2.
3.
6.
1.
2.
3.
4.
5.
6.
The display is lit up
Temperature
The system is congured to control a
certain temperature. The actual value and
set point for this temperature is shown.
Access code 1111 may be necessary.
Set point temperatures for outdoor tempe-
rature compensation are shown. The control
curve is dened with 8 node points. Only 2 or
3 node points are shown in the display, and
the remaining node points are displayed by
scrolling and .
Temperatur
To return to the start menu at once
– press
and
several times.
Select and conrm new set point tempera-
ture.
The system will automatically return to the
start menu after some minutes.
x 1
x 2
x 1
x 1
x 1
x 2
4.
5.
Setting of temperature
Value to be changed ashes.
Value to be changed ashes.
Select one new set point temperature
for each outdoor temperature shown on
the curve and conrm selected value with
OK.The system will automatically return to
the start menu after some minutes.
Act: xx.x ˚C Setp
Setp: yy.y ˚C
Setp: yy.y ˚C
Outdoor comp Setp.
xx ˚C = zz.z ˚C
yy ˚C = vv.v ˚C
Outdoor comp. Setp
xx ˚C = zz.z. ˚C
yy ˚C = vv.v ˚C
Unit
Date, time
Syst: Running mode (Auto, Ma-
nual reduced, Man. norm., O)
To return to the start menu at once
– press
and
several times.
Modication of outdoor compensated supply temperature
Follow the steps
below