ERP Data+SYSPLIT WALL OUT 09 INV32 HP Q 315809
6
The display
shows
x 1
x 1
x 2
x 1
x 3
1.
2.
10.
11.
12.
3.
4.
5.
Value to be changed ashes.
Change of set point for normal ow (1/1)
and for reduced ow (1/2). Access code
1111 may be necessary.
6.
7.
The display is lit up
Air control
Selection of supply air fan (SAF)
or exhaust air fan (EAF).
Supply air fan selected as example.
Conrm change of the set point value
with OK. Value to change is ashing.
Conrm selected value with OK
Conrm change of the set point value
with OK. Value to change is ashing.
Outdoor compensation of the airow is
able to reduce the air ow when the out-
door temperature is low. Two node points
- outdoor temperature/airow denes the
reduction of airow by declining outdoor
temperature. The temperature compensa-
tion between the 2 node points is linear.
Select and conrm new value for normal air
ow (1/1) and for reduced air ow (1/2)
To return to the start menu at once
– press
and
several times.
8.
9.
Setting of ows - Flow control
SAF (SAF = Supply air fan)
EAF (EAF = Extract air fan)
Flow control SAF
Setp. 1/1: xx.xxx m³/h
Setp. 1/2: yy.yyy m³ /h
Setp. 1/1: x.xxx m³/h
Setp. 1/2: y.yyy m³/h
Setp. 1/1: xx.xxx
Setp. 1/2: yy.yyy
Outdoor comp. setp
aa ˚C = bb.bbb m3/h
cc ˚C = dd.ddd m3/h
Unit
Date, time
Syst: Running mode (Auto, Ma-
nual reduced, Man. norm., O)
Follow the steps
below
Flow control (control of the ow
through the fans)