Connect Setup uk 06 2017 V3

Systemair Connect set-up
|
11
6. At login it now looks like this:
Create Device
To create a Device use the serial number. The serial num-
ber is printed on the controller. In order to get in touch
with the Device via Systemair Connect, it must be record-
ed in the database. The registration is done automatically
when the Systemair Connect setting in the Device is set
to active. If you have ordered the air handling unit with
Systemair Connect enabled from the factory you can skip
this step.
Prepare your Device for Systemair Connect by
using the Display
Communication setting CLOUDigo must be changed from
“Not active” to “Active”.
Follow the table below to change from “Not active” to
“Active”.
Navigate
Change setting
Change value
Confirm setting