Connect Setup uk 06 2017 V3

Systemair Connect set-up
|
13
3. Find the serial number of your Device in the list, select
it and click OK. Then there will be contact to the Device.
4. Go to Tools and select ”Synchronize all parameters” or
use the shortcut below the menu bar.
5. E tool will now read all parameters in the controller.
6. If the controller is an older version compared to E tool
this dialogue box will appear. Select ”Make the confi-
guration compatible with the controller” and click OK.
E tool is hereafter adapted to the Device.
Note: If there is accordance between software and con-
troller, the System will go directly to the next step. Then
the E tool will read all parameters from the controller and
compare them with the existing setup in E tool.