Geniox GO User manualv7.2
Table Of Contents
- A Manufacturer
- B Name of machines
- C Declaration of Conformity
- D General descriptions, dangers and warnings
- E The control panel for the control system.
- F Drawings, diagrams, guides and instructions for the use, maintenance and repair
- G Employees in charge of operation/control/maintenance
- H Unintended use and misuse – inappropriate applications for the machine
- I Instructions for unloading and handling on site
- J Installation
- J.1 Installation - mechanical
- J.1.1 Free area in front of and above the unit
- J.1.2 Supporting surface
- J.1.3 Adjustable feet under legs or base frame and transport of sections
- J.1.4 Base frame assembly
- J.1.5 Base frames for outdoor units
- J.1.6 Outdoor units — support under the base frame of the unit
- J.1.7 Installation on the site of unit sections at the base frame when sections are delivered on pallets
- J.1.8 Joining the unit sections
- J.1.9 Fitting the ductwork
- J.1.10 Risk of stack effect by vertical ducts and wind pressure on louvers
- J.1.11 Door alignment
- J.1.12 Lock the doors by using the key
- J.2 Installation - electrical
- J.3 Installation – Pipes for water – hot and chilled, valves and drains
- J.1 Installation - mechanical
- K Installation and assembly instructions for reduction of noise and vibration emissions
- L Start-up, adjustments, use and commissioning
- M Information about the residual risks
- N Instructions on the protective measures during repair and maintenance
- O The essential characteristics of tools which may be fitted to the machinery
- P The conditions of stability during use, transportation, assembly, dismantling when out of service
- Q Instructions for machinery where these are regularly to be transported
- R The operating method to be followed in the event of breakdown. Safe restart.
- S Adjustment and maintenance operations
- T Instructions to enable adjustment and maintenance safely
- U Information on airborne noise emissions exceeding 70 dB(A)
- Annex 1 Technical data – unique data for every unit (in separate cover)
- Annex 2 Assembly of base frame – height 118 mm for unit sizes 10 – 18
- Annex 3 Assembly of base frame – height 118 mm for unit sizes 20 – 27
- Annex 4 Assembly of base frame – height 218 mm for unit sizes 10 – 18
- Annex 5 Assembly of base frame – height 218 mm for unit sizes 20 – 27
- Annex 6 Installation of steel roof in the sizes 10 – 31
- Annex 7 Speed control for rotor and assembly of divided rotor
- Annex 8 Reversible heat pump unit (in separate cover, if heat pump was delivered)
- Annex 9 Menu for internal controller in the heat pump unit (in separate cover, if heat pump was delivered)
- Annex 10 Connection of fan motor and set-up manual for frequency converter
- Annex 11 Commissioning protocol (in separate cover)
- Annex 12 Report with data from final functional test on the Systemair factory
- Annex 13 Short description of main components in the control system
- Annex 14 Wiring diagram (in separate cover)
- Annex 15 Operator’s guide (How to use the Systemair control panel) (in separate cover)
211728 | v7.2
Contents
M.1.2 Common for all unit sections ........................................................................................ 28
M.1.3 Common for all unit sections by insufficient lighting .......................................................... 29
M.1.4 Dampers.................................................................................................................. 29
M.1.5 Attenuators.............................................................................................................. 29
M.1.6 Filters ..................................................................................................................... 29
M.1.7 Plug fans ................................................................................................................. 30
M.1.8 Batteries for heating and cooling................................................................................... 30
M.1.9 Heat pump units........................................................................................................ 31
N Instructions on the protective measures during repair and maintenance ...................................................... 31
O The essential characteristics of tools which may be fitted to the machinery.................................................. 31
P The conditions of stability during use, transportation, assembly, dismantling when out of service ...................... 31
P.1 Installed reliable to avoid units to be tilted or moved by storm......................................................... 31
P.2 Transport of section with heat pump unit .................................................................................... 32
P.3 Disposal of the heat pump system............................................................................................. 32
P.4 General disassembly – sharp edges............................................................................................ 32
Q Instructions for machinery where these are regularly to be transported ....................................................... 32
R The operating method to be followed in the event of breakdown. Safe restart. ............................................. 32
S Adjustment and maintenance operations .............................................................................................. 32
S.1 Shutdown of the unit to a safe state .......................................................................................... 32
S.2 Recommended maintenance intervals........................................................................................ 33
S.3 Filters – always replace filters with new filters with the same characteristics to maintain SFP
value ................................................................................................................................. 33
S.3.1 Bag filters – the number of filters and sizes of frames ........................................................ 34
S.3.2 Panel filters – the number of filters and the sizes of the frames ............................................ 34
S.3.3 Bag filters ................................................................................................................ 35
S.3.4 Panel filters.............................................................................................................. 37
S.4 Changing the Internal Battery in the controller ............................................................................. 37
S.5 Other functions to maintain ..................................................................................................... 39
S.5.1 The unit................................................................................................................... 39
S.5.2 Dampers.................................................................................................................. 40
S.5.3 Rotary heat exchanger ............................................................................................... 40
S.5.4 Cross flow and counter flow exchanger .......................................................................... 41
S.5.5 Run-around heat exchanger......................................................................................... 42
S.5.6 Coils/batteries for heating and/or cooling ....................................................................... 42
S.5.7 Plug fans ................................................................................................................. 43
S.5.8 Silencer ................................................................................................................... 43
S.5.9 Outdoor air section .................................................................................................... 43
S.5.10 Heat pump unit ......................................................................................................... 43
T Instructions to enable adjustment and maintenance safely........................................................................ 44
T.1 Protective measures and additional protective measures................................................................ 44
T.1.1 Necessary protection measures prior to start-up .............................................................. 44
T.1.2 Safe adjustment and maintenance ................................................................................ 44
T.1.3 Personal protective equipment for maintenance staff – health and safety............................... 44
U Information on airborne noise emissions exceeding 70 dB(A) .................................................................... 45
Annex 1 Technical data – unique data for every unit (in separate cover) ......................................................... 48
Annex 2 Assembly of base frame – height 118 mm for unit sizes 10 – 18........................................................ 48
2.1 Base frame length 482 – 2564 [mm] Unit size 10 – 18 ................................................................... 48
2.2 Base frame length 2582 – 4964 [mm] Unit size 10 – 18 ................................................................. 49
2.3 Base frame length 4982 – 6164 [mm] Unit size 10 – 18 ................................................................. 51
Annex 3 Assembly of base frame – height 118 mm for unit sizes 20 – 27........................................................ 51
3.1 Base frame length 482– 2564 [mm] Unit size 20 – 27 .................................................................... 52
3.2 Base frame length 2582 – 4964 [mm] Unit size 20 – 27 ................................................................. 53
3.3 Base frame length 4982 – 6164 [mm] Unit size 20 – 27 ................................................................. 54
Annex 4 Assembly of base frame – height 218 mm for unit sizes 10 – 18 ....................................................... 55
4.1 Base frame length 482– 2564 [mm] Unit size 10 – 18 .................................................................... 56
4.2 Base frame length 2582 – 4964 [mm] Unit size 10 – 18 ................................................................. 57
4.3 Base frame length 4982 – 6164 [mm] Unit size 10 – 18 ................................................................. 58
Annex 5 Assembly of base frame – height 218 mm for unit sizes 20 – 27........................................................ 59
5.1 Base frame length 482– 2564 [mm] Unit size 20 – 27 .................................................................... 60
5.2 Base frame length 2582 – 4964 [mm] Unit size 20 – 27 ................................................................. 61
5.3 Base frame length 4982 – 6164 [mm] Unit size 20 – 27 ................................................................. 62
Annex 6 Installation of steel roof in the sizes 10 – 31.................................................................................. 63
6.1 Warnings ............................................................................................................................. 63
6.1.1 Components............................................................................................................. 63
6.1.2 Mounting rails and roof sheets ..................................................................................... 64