Geniox QuickGuide uk 08 2017

Standards and certications
The Geniox design is based on the
demands in the following CEN and
ISO standards:
EN 305:1997
Heat exchangers. Denition and test
procedures.
EN 308:1997
Heat exchangers. Test procedures.
EN 779:2012
Particulate air lters for general
ventilation. To be replaced with EN
ISO 16850 1:2016, in 2018.
EN 1216:1999
Heat exchangers.
EN 1751:2014
Aerodynamic testing of dampers and
valves.
EN 1886:2008
Air handling units.
Mechanical performance.
EN 13053:2011
Ratings and performance for units
and components.
EN 13779:2007
Ventilation for non-residential
buildings. Performance requirements.
EN 60204-1:2006
Machine safety.
Electrical equipment of machines.
EN ISO 3741:2010
Determination of sound power level
in reverberation rooms.
EN ISO 5136:2009
Determination of sound power level
in a duct.
EN ISO 12100:2011
Safety of machinery.
EN ISO 12944-2:2000
Corrosion protection. Classication of
environments.
EN 378-1&2-2016
Refrigerating systems and heat
pumps safety and environmental
requirements.
Eurovent certication
Geniox air handling units are
Eurovent certied. This ensures the
conformity between the calculated
performance in SystemairCAD design
programme, and the measured
performance at independent test
laboratories. Certicate 17.07.012
and 17.07.013.
Machinery directive
Geniox air handling units are
manufactured according to the
safety demands of the EU Machinery
Directive 2006/42/EF. This is
conrmed through the issuance
of corresponding Declaration of
Conformity and CE label.
Ecodesign Directive
The Ecodesign Directive 1253/2014
prescribes minimum requirements
regarding heat recovery efciency,
fan efciency, SFP internal values,
and operation of the air handling
unit. The selection software
SystemairCAD is updated with an
automatic Ecodesign calculation
that will tell you whether the
requirements for both 2016 and
2018 are fullled.
Eurovent energy classication
Geniox air handling units are energy
classied according to Eurovent’s
guidelines for air handling units
RC 6/C/005-2017. The energy class
expresses the unit’s total energy
consumption. The energy class is
calculated by the design program
SystemairCAD based on the actual
data of the designed unit.
ErP
2016
ErP
2018
AHU N
o
17.07.012
Range: Geniox-1
AHU N
o
17.07.013
Range: Geniox-2
ENERGY EFFICIENCY
2017
Report to performance data
17.07.012
ENERGY EFFICIENCY
2017
Report to performance data
17.07.013
Geniox Quick guide | 15