3060386 Geniox OIPM

Geniox Air Handling Unit - User Manual | 3060386
C.3 Dimensions of the units
D Employees in charge of operation/control/maintenance
The units are constructed and built with a fully integrated control system. After start-up and hand-over from installer to operators, the
unit operates fully automatically.
Indications of operating status as well as indication of faults are visible on the display. The operators can enter new parameters in the
controller. The controller can be connected to a BMS system so that new parameters can be selected. The operators do not need to
open inspection doors for the operation.
Skilled technicians must carry out maintenance, as well as, repairs.
E Intended use and range of applications
Theairhandlingunitsareintendedforthetransportandtreatmentofairbetween-40°Fand+110°FTheunitsareexclusivelyfor
comfortventilation.Theunitsarenotintendedforcorrosiveenvironmentsunlessspeciedotherwise.
F Unintended use and misuse – inappropriate applications for the machine
Please note that air-handling units that are intended for outdoor installations need to be indicated as such at the time of design. Air-
handling units are intended for the sole purposes of transporting and conditioning the outside or return air, and providing ventilation to
an indoor environment.
Geniox air handling units are not designed to be used in highly corrosive environments, applications with solid particles in the air stream,
chlorine, saltwater, or any toxic chemicals/gas in and around the air-handler environment. Care also must be taken when using the units
with high humidity applications.
Systemair does not assume any responsibility to the safety of the installation/operation, the resulting quality of the process/production,
the health of occupants, and/or unit performance if the environment is not suitable to the AHU design. Any misuse of the mechanical
structure/componentsoftheair-handlerorchangestothenalunitbuildmayresultinunsafeconditions.Anyfailuretoadheretothe
aforementioned will invalidate the factory warranty.
Furthermore, Geniox units are not intended as:
- Transportation pods
- Storage vessels or any type of storage
- Partiallynishedductsystems
- Incomplete construction areas or project
- Donotusewithunnishedorimproperancillarytrades(controls,plumbing,electrical,etc.)
W
o
W
i
H
i
H
D
H
S
Unit Size W
o
H
S
H
D
W
i
H
i
Geniox 10 66 35 66 61 30
Geniox 12 74 39 74 69 33
Geniox 15 82 43 82 77 37
Geniox 20 90 47 90 85 41
Geniox 25 98 50 98 93 45
Geniox 30 110 54 106 104 49
Geniox 35 117 58 113 112 53
Geniox 40 125 62 121 120 57
* The length of the unit depends on the functions and components selected
by user and it is shown on the technical reports and unit nameplate.
* For more accurate dimensions and drawings select the desired unit using
SystemairClick online software.
* All the dimensions are in inches.
10 | Employees in charge of operation/control/maintenance