3060386 Geniox OIPM

3060386 | Geniox Air Handling Unit - User Manual
Adjustment and maintenance operations | 39
Placetheself-adhesivestripononeverticalsideofthelterfame
Check that the end of the strip is fully even with the horizontal
sideofthelterframe.
Remove excess of the strip. The end of the strip must be fully
evenwiththehorizontalsideofthelterframe.
PushthelterscarefullyintheU-proletobesurethatthere
arenoleakagesbetweenthelters.Checkthattheverticalside
ofthelastlterintheU-proleisfullyevenwiththeendofthe
U-prole.Iftheendofthelastlterisnotfullyevenwiththeend
oftheU-proleanadditionalself-adhesiveprolemustbeadded
toavoidanygapbetweentherubberproleontheinspection
doorandthelastlter.