GENIOX VOCLEAN IOM

19
H.2.6 Remove transport brackets - when spring mounts are installed
H.2.7 Installation of Filters
H.2.8 Installation of the Metallic Filter
H.2.9 Installation of the Bag Filter
If the fans are installed on spring mounts the transport brackets must be removed after the installation of the air handling unit.
Twotransportbracketsarettedtothecoilspringsduringtransportandinstallation.Bothtransportbracketsmustallberemoved
to give the full anti-vibration function to the coil springs. The transport brackets are made more visible with yellow labels. After
removal of the transport brackets they must be disposed of safely.
After disposal of the transport brackets the yellow label on the outside of the fan inspection door has no function and should be
removed.
Afterthesectionshavebeenassembled,theltersthathavebeensentinaboxshouldbeinstalled.Werecommendthatthelters
beinstalledaftercompletingtheassemblyofthesections,toavoiddirt,tearing,ordamagetolters.
Railshavebeenmountedwithinthesectiontoenableinstallationofthemetalliclter.
Theinstallationcanbenalizedbyslidingeachmetalliclterontheserails.
Railshavebeenmountedwithinthesectiontoenableinstallationofthebaglter.
Thebagltershouldbeslidinaverticalpositionontheserailswithinthesection.
Figure 16. Fan - Motor
Gap Between the Funnel
and Blade
Fan Blade
Fan Motor
Vibration
Attenuator
Base
Funnel
Installation