GENIOX VOCLEAN IOM

22
H.2.14 Installation of the Autowash System
Water that comes into the Autowash system panel is split into branches inside the panel and each branch sends water to each
wash groups of the autowash system separately. Once the water pipes located here have been connected, clamps should be used
to prevent the pressure inside the pipe from dislodging the hoses.
Figure 23: Connection of water pipes of the
Autowash system
WARNING
It is recommended that the length of pipe between the Autowash system panel and the washing group not exceed 5
meters.
Measures should be taken to prevent the water inside the pipes from freezing during winter conditions.
The greasy waste water emerging from the drainage pipe should be passed through a grease trap.
K Start-up, adjustments, use, commissioning and uni tin hipernation
From www.systemair.com.tr
Your local Systemair company is able to provide the below-mentioned documents and data.
Common
• ThisUserManualinanorderspecicversion
• Declaration of conformity with production number for this unit and the unique technical data with production number
for this unit
All protection and safety measures must be met before start-up of the unit. The mains supply voltage must also be checked too.
The mains supply voltage must be measured at the supply terminals in the cabinet.
K.1 Documentation is available for download
K.2 Start-up by installer
Installation