BASSO-1010D2/ISO User Manual Version 1.0 2021/3/4 www.sysbas.
Revision History Revision Date 2021.03.04 Document Pages Ver. Revised 1.
BASSO-1010D2/ISO User Manual Contents 1. BEFORE USING .................................................................................................................... 4 2. COMPONENTS ...................................................................................................................... 5 3. PRODUCT .............................................................................................................................. 6 4. HOW TO USE .................................................
BASSO-1010D2/ISO User Manual Please be sure to read this manual before using and use the product safely and accurately. • Pictures and photos in the manual may be different from the physical, and the document is subject to change without notice to improve performance. For the last information, please visit our website (www.sysbas.com). • To view frequently asked questions and answers, please visit our website and find Support –Technical Support –FAQ section.
BASSO-1010D2/ISO User Manual 1. Before Using In factories or poor sites, noise or surges generated from outside and incoming along the communication lines frequently cause communication errors, and this continuous electrical shock poses the risk of damaging expensive equipment and facilities.
BASSO-1010D2/ISO User Manual 2.
BASSO-1010D2/ISO User Manual 3.
BASSO-1010D2/ISO User Manual LED PWR (Red): Illuminates when power is supplied. RXD (Red): Flashes when RS-232 data is received. TXD (Green): Flashes when RS-232 data is transmitted. Connector Serial Port(DB9 Female, Primary) Serial Port(DB9 Male, Secondary) Front: Serial port(primary side): A serial port which is connected to RS-232 Male equipment and can communicate.
BASSO-1010D2/ISO User Manual 4. How to Use 1) RS-232 – BASSO-1010D2/ISO –------------- RS-232 By connecting BASSO-1010D2/ISO between RS-232 ports on a PC or equipment and serial equipment with RS-232 port, the connection between RS-232 ports is completely separated electrically, and protects against electrical shocks delivered through the RS-232 signal line.
BASSO-1010D2/ISO User Manual ------------------------------Appendix----------------------------1.
BASSO-1010D2/ISO User Manual 2. Serial Port Pin Assignment Pin No.
BASSO-1010D2/ISO User Manual 3. Specification Standard RS-232 Primary: DCE(DB9 Female) Serial Port Secondary: DTE(DB9 Male) Serial Signals TXD, RXD, RTS, CTS (DTR for Power source) Baud Rate Max. 921.6kbps Contact–Min: ±8kV Contact–Max: ±15kV ESD Air–Min: ±15kV Air–Max: ±30kV Peak Pulse Current Protection Max. 12A (tp = 8/20 μs) Peak Pulse Power Max. 350W (tp = 8/20 μs) IEC 61000-4-2 Standards IEC 61000-4-4 IEC 61000-4-5 Hardware Power Requirement Default: No Power, Option: Pin no.
BASSO-1010D2/ISO User Manual 4. Certification - KC Number: R-R-STB-BASSO1010D2 5. Copyright Copyright ⓒ 2021 SystemBase CO., Ltd. All rights reserved. This manual is a document protected by Copyright law. Unauthorized copying, duplicating, publishing of some or all of contents without prior consent from SystemBase is against Copyright Law. www.sysbas.
If you have any inconvenience while using the product, please contact us. Email: • Purchase/Quotation: overseas@sysbas.com • Technical Support/RMA: tech@sysbas.com www.sysbas.