eCAN_UserManual_Eng_DM v1.0.1

eCAN User Manual
21
7. Setting Examples
Based on the information above, this chapter explains easy setup information through various connections. You can
understand how to set the following configuration as an example.
Connection between CAN equipment(CAN Bus) and PC
Category
PC Connected LAN
( or PC Connected WiFi )
eCAN-1
Network Setting
Device IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.0.1
DNS:168.126.63.1
Connection Type: Static
Device IP Address: 192.168.0.200
Subnet Mask: 255.255.255.0
Gateway: 192.168.0.1
DNS:168.126.63.1
Ethernet Options
Setting
Access to COMx port using COM
Redirector
(access to 192.168.0.200 4001)
Operation Mode: COM Redirector
Local Port: 4001
TCP Server
Local Port: 4001
Operation Mode: TCP Client
Target IP: 192.168.0.100
Target Port: 4001
Operation Mode: TCP Client
Target IP: 192.168.0.200
Target Port: 4001
Operation Mode: TCP Server
Local Port: 4001
Operation Mode: UDP Server
Local Port: 4001
Operation Mode: UDP Client
Target IP: 192.168.0.100
Target Port: 4001
Operation Mode: UDP Client
Target IP: 192.168.0.200
Target Port: 4001
Operation Mode: UDP Server
Local Port: 4001
* Setting values are examples to help you understand. The value may vary depending on the product and
site.
Various communication is available through COM Redirector, Server/Client, and UDP Server/Client is possible as
shown above.