User's Manual

Eddy User's Guide
40
Menu Default Descriptions
Device Name Eddy Name of the current device
Line Type Static IP IP obtaining method for Eddy’s network connection.
IP Address 192.168.0.223
Current IP address Eddy is assigned to.
(When line type is Static IP, manually enter an appropriate IP address. When line type
is DHCP, current IP is displayed, but it is not editable.)
Subnet Mask 255.255.255.0
Current subnet mask Eddy is assigned to.
(When line type is Static IP, manually enter an appropriate subnet mask. When line
type is DHCP, current subnet mask is displayed, but it is not editable.)
Gateway 192.168.0.254
Current default gateway Eddy is assigned to
(When line type is Static IP, manually enter an appropriate default gateway. When
line type is DHCP, current default gateway is displayed, but it is not editable.)..
DNS 168.126.63.1 Domain Name Service IP address
Main features for LAN Configuration is as follows.
þ Since S4M doesn’t have LAN port, doesn’t include bellows
Menu Default Descriptions
DHCP Server Enable Enable or disable DHCP server.
IP Address 10.10.1.1 Current IP address for LAN is assigned to.
Subnet Mask 255.255.255.0 Current subnet mask for LAN is assigned to.
Lease Start
Address
10.10.1.2 If DHCP server is enabled, start address of the DHCP scope for leasing.
Lease End
Address
10.10.1.30 If DHCP server is enabled, end address of the DHCP scope for leasing.
Lease Time 180 DHCP lease time.
Main features for Network Service Configuration are as follows.
Menu Default Descriptions
Portview
IP / Port
0.0.0.0 / 4000
Set the IP address and the port number of the PC where Portview is installed. For
more information on Portview, please refer to the Portview User Manual.
If IP is set to 0.0.0.0, this feature is disabled
DDNS
(Username/
Password)
203.32.117.1
Register DDNS server’s IP address for DDNS service.
DDNS service used in Eddy is supported by http://ddns.nu
default ID is eddy and default password is 99999999
if you want to used this ,you should register your own in http://ddns.nu
Telnet Service Enable
Enable or disable Telnet service.
If disabled, you cannot connect to Eddy via Telnet.