User's Manual

ManualsBrandsSystemBase ManualsElectronicsEmbedded WiFi Module

Eddy User's Guide

Menu Default Description

Wireless

Network

Disable

When enabled, Eddy-WiFi is available.

•Disable: Eddy-WiFi is not available.

•Enable: Eddy-WiFi is available.

Wireless Mode Infrastructure

Set the wireless LAN mode.

(Option: Infrastructure, Ad-Hoc)

•Infrastructure : Use Eddy-WiFi under the Infrastructure mode. This mode is used for connecting to the

wireless AP (Access Point) as a client to connect to other network.

•Ad-Hoc : Use Eddy-WiFi under the Ad-hoc mode. This mode is used for 1:1 communication with another

Ad-hoc client.

Wireless

Network Mode

802.11b/g Mixed

Sets the operation protocol of a wireless network.

(Option: 802.11b/g mixed, 802.11B only, 802.11G only)

•802.11b/g mixed: 802.11b and 802.11g are supported.

•802.11B only: Use only 802.11b.

•802.11G only: Use only 802.11g.

Wireless

Network

Name(SSID)

None

Sets the identification (SSID) of a wireless network to be connected.

(Up to 32 bytes)

Channel Auto

Selects a frequency channel for wireless connection.

(Option: Auto, 1 ~ 13)

•Auto: Connect a channel specified in AP automatically. In most cases, this setting is used.

•Value Specification: Specify a channel to be connected manually.

Bitrate Auto

Sets the speed for wireless connection.

(Option: Auto, 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54Mbps)

The setting as Auto adjusts the speed depending on signal sensitivity and noise. In most cases, this

setting is used.

If Wireless Network mode is set to 802.11b/g Mixed, all options can be selected.

The setting as 802.11a only allows setting as 6, 9, 12, 18, 24, 36, 48 and 54Mbps.

The setting as 802.11b only allows setting as 1, 2, 5.5 and 11Mbps.

The setting as 802.11g only allows setting as 6, 9, 12, 18, 24, 36, 48 and 54Mbps.

RTS Threshold 2347

Sets the minimum packet size to send RTS in a communication node.

(Range: 1 ~ 2347 bytes)

This setting adds the RTS/CTS handshake procedure to verify that the transmission channel is empty

before transmitting a packet.

In most cases, this setting is not used.

The setting as 2347 disables this function.