User's Manual

Eddy User's Guide
5
Chapter 1. Introduction
Eddy, SystemBase Embedded Device Server Module, is an optimized minimal CPU module for developing an industrial embedded device. This manual introduces
general factions for the Eddy.
1.1 About this manual
This manual guides that users are able to develop Eddy for a device server including the function that transfers from serial data to LAN. Setting Eddy’s
configurations, status monitoring, firmware update, and other administration work are also included, H/W level integration and S/W setting information can also
be found.
1.2 Who should read this manual
This guide is designed for Eddy users and administrators. It is strongly recommended that anyone trying to apply, use, and maintain Eddy read this document.
It will be a great starting point for any administrator who wants to easily monitor and control Eddy and its connected devices.
1.3 Contents
Chapter 1. Introduction is a preface with general information and introductory notices.
Chapter 2. Getting Started gives a brief introduction to Eddy series, including features and applications.
Chapter 3. Hardware Descriptions explains the layout and pin specifications with block diagram and drawings.
Chapter 4. Integration assists you connecting Eddy to serial and network environment. It covers first time boot-up and status check procedures.
Chapter 5. Configuration via Web provides ways to configure and to connect Eddy via web browser.
Chapter 6. Configuration via Telnet provides commands and its explanation to configure and to connect Eddy via web Telnet.
Chapter 7. Appendix provides firmware update guides and detailed technical specifications.