User's Manual

Eddy User's Guide
52
In order to use the SNMP Agent, SNMP v1/v2/v3 Agent become enabled and pushes the [Submit] button.
Feature Default Descriptions
SNMP v1/v2/v3
Agent
Disable
Enable or disable Simple Network Management Protocol (SNMP) support.
(Options : Disable/Enable)
V1/2 Attribution ReadOnly
SNMP V1/2 Attributes can read and write by SNMP Agent.
In order to read attributes only, change the feature to "ReadOnly".
In order to read and write attributes, change the feature to "ReadWrite".
(Options : ReadOnly/ ReadWrite)
V3 Attribution ReadOnly
SNMP V3 Attributes can read and write by SNMP Agent.
In order to read attributes only, change the feature to "ReadOnly".
In order to read and write attributes, change the feature to "ReadWrite".
(Options : ReadOnly/ ReadWrite)
V3 Username/
Password
eddy/administ
rator
Configure the Username and the password when use SNMP V3.
The Password is at least 8 character string
TRAP IP/ Port 0.0.0.0/162 Configure the server IP address and Port which receive the TRAP information.
System reset
notification
Enable
If Enable is selected, inform the “System reset info.”
(Option : Enable, Disable)
Port connect
notification
Disable
If Enable is selected, inform the “Serial Port opened info.”
(Option : Enable, Disable)
Port disconnect
notification
Disable
If Enable is selected, inform the “Serial Port Closed info.”
(Option : Enable, Disable)
5.9 Change Password
Change Web/Telnet access username and password. After changing values, you need to click ‘Submit’ button. Then you will see the same page with
modified values. Please note that you have to ‘Save & Reboot’ in order to see these changes in effect. Changes will be discarded if you do not save
current settings.
◆ Default user id : eddy