User Manual

Eddy User's Guide

System reset

notification

Enable

If Enable is selected, inform the ‚System reset info.‛

(Option : Enable, Disable)

Port connect

notification

Disable

If Enable is selected, inform the ‚Serial Port opened info.‛

(Option : Enable, Disable)

Port disconnect

notification

Disable

If Enable is selected, inform the ‚Serial Port Closed info.‛

(Option : Enable, Disable)

5.9 Change Password

Change Web/Telnet access username and password. After changing values, you need to click ‘Submit’ butt

on. Then you will see the same page with modified values. Please note that you have to ‘Save & Reboot’ i

n order to see these changes in effect. Changes will be discarded if you do not save current settings.

◆ Default user id : eddy

◆ Default password : 99999999

5.10 Update Firmware

Firmware is an application embedded in Flash memory of Eddy. Set the location of the firmware file to update,

using the ‘Browse…‘ button. The selected firmware will be transferred to Eddy when you click ‘Start Upd

ate’. After the transmission is complete, Eddy will be automatically restarted to operate with the new firmware.