DataSheet_SB16C1053APCI_v106

SB16C1053APCI
PCI Target Controller with 2 Serial, 1 Parallel and MIO Bus
PCI to 2S+1P with MIO Bus Bridge
JULY 2013 REV 1.06
12
5.5 Serial 4-port (4S)
Serial 4-port is generally made with SB16C1053APCI (called by 4S Mode). Especially
SB16C1053APCI support 8-bit legacy local bus for extension of additional serial ports.
SystemBase revised the MIO BUS
TM
(Multi-Port I/O Bus) for the extension. Basically
Dual-UART is built inside the SB16C1053APCI. So we can make 4-port Serial add-in
card using external Dual-UART through the MIO BUS
TM
.
SB16C1053APCI is used as a PC add-in card type in Figure 5–5
Figure 5–5: Serial 4-port Mode Application Block Diagram
5.6 Serial 6-port (6S)
Serial 6-port is generally made with SB16C1053APCI (called by 6S Mode). Especially
SB16C1053APCI support 8-bit legacy local bus for extension of additional serial ports.
SystemBase revised the MIO BUS
TM
(Multi-Port I/O Bus) for the extension. Basically
Dual-UART is built inside the SB16C1053APCI. So we can make 6-port Serial add-in
card using external Quad-UART through the MIO BUS
TM
.
SB16C1053APCI is used as a PC add-in card type in Figure 5–6
Figure 5–6: Serial 6-port Mode Application Block Diagram
C
O
N
32-bit PCI Local Bus, 66/33MHz
2-portSerial Signals
MIO Bus
Interface
Single-UART
Single-Parallel
SB16C1053APCI
Single-UART
2-portSerial Signals
Dual-UART
C
O
N
4-portSerial Signals
32-bit PCI Local Bus, 66/33MHz
MIO Bus
Single-UART
Single-UART
SB16C1053APCI
Single-Parallel
Interface
Quad-UART
2-portSerial Signals